ISO 11439:2000 standart steel cylinder . CNG cylinder, tank under B/V system
1) CNG-1 Steel cylinder
2)BV certificated
3)ISO11439:2000 , GB standart .DOT start can be choose
3)From 20L tank to 140L tank can be choose
4) cylinder with valve can be choose
SYP cng cylinder is strict product in according to ISO11439:2000 and DOT 3AA(American area use) . each cylinder will be 100% achieve hydraulic pressure test before we ship to our customer .
All the cylinder is Pass finish the type test and choose the 34CrMo4 seamless steel tube for Type 1 and Type 2 CNG cylinder
Till now SYP can offer to our customer the full serice CNG cylinder product as following
Type 1 steel CNG cylinder
Type 2 Glass fiber hoop wrapped Steel CNG cylinder ISO11439:2000 standard
Type 3 Carbon fiber full wrapped aluminum CNG cylinder
Cylinder size and volume we offer
Type 1 279mm seriese from 20L , 30L. 35L. 40L. 55L. 60L. 70L. 80L
325mm series from 40L. 50L. 60L, 70L. 80L. 90L. 100L.110L. 120L
356mm series from 60L , 70L, 80L, 90L, 100L, 110L, 120L 130L. 140L
406mm series from 60L , 70L, 80L, 90L, 100L, 110L, 120L 130L. 140L
Note: DOT standart will be point in advance
Type 2 350mm series from 40L. 50L. 60L, 70L. 80L. 90L. 100L.110L. 120L
360mm series from 60L , 70L, 80L, 90L, 100L, 110L, 120L 130L. 140L
420mm series from 60L , 70L, 80L, 90L, 100L, 110L, 120L 130L. 140L
Note: CNG cylinder is with 15 year quality warranty
Monday, October 24, 2011
Type 2 Glass fiber hoop wrapped CNG cylinder
Type 2 CNG cylinder under ISO11439:2000 standart . work pressure 20Mpa , With high quality green glass fiber .
SYP cng cylinder is strict product in according to ISO11439:2000 and DOT 3AA(American area use) . each cylinder will be 100% achieve hydraulic pressure test before we ship to our customer .
All the cylinder is Pass finish the type test and choose the 34CrMo4 seamless steel tube for Type 1 and Type 2 CNG cylinder
Till now SYP can offer to our customer the full serice CNG cylinder product as following
Type 1 steel CNG cylinder
Type 2 Glass fiber hoop wrapped Steel CNG cylinder ISO11439:2000 standard
Type 3 Carbon fiber full wrapped aluminum CNG cylinder
Cylinder size and volume we offer
Type 1 279mm seriese from 20L , 30L. 35L. 40L. 55L. 60L. 70L. 80L
325mm series from 40L. 50L. 60L, 70L. 80L. 90L. 100L.110L. 120L
356mm series from 60L , 70L, 80L, 90L, 100L, 110L, 120L 130L. 140L
406mm series from 60L , 70L, 80L, 90L, 100L, 110L, 120L 130L. 140L
SYP cng cylinder is strict product in according to ISO11439:2000 and DOT 3AA(American area use) . each cylinder will be 100% achieve hydraulic pressure test before we ship to our customer .
All the cylinder is Pass finish the type test and choose the 34CrMo4 seamless steel tube for Type 1 and Type 2 CNG cylinder
Till now SYP can offer to our customer the full serice CNG cylinder product as following
Type 1 steel CNG cylinder
Type 2 Glass fiber hoop wrapped Steel CNG cylinder ISO11439:2000 standard
Type 3 Carbon fiber full wrapped aluminum CNG cylinder
Cylinder size and volume we offer
Type 1 279mm seriese from 20L , 30L. 35L. 40L. 55L. 60L. 70L. 80L
325mm series from 40L. 50L. 60L, 70L. 80L. 90L. 100L.110L. 120L
356mm series from 60L , 70L, 80L, 90L, 100L, 110L, 120L 130L. 140L
406mm series from 60L , 70L, 80L, 90L, 100L, 110L, 120L 130L. 140L
XunDa PE Outer-layer Anticorrosion Tape
We offer these PE outer-layer anticorrosion tapes in different sizes as per demands of our customers at really affordable prices
Description
The Polyehtylene Anticorrosion Tape 200 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines. The outer-layer tape backing shall be compounded so that it will be resistance to outdoor weathering.
The
outer-layer tape
shall be applied after the inner-layer tape by hand or with a wrapping machine.
Structure
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Outer layer: Special blend of stabilized polyethylene
Features:
Excellent adhesion to inner-layer tape and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
Cold applied
Technical datas:
OUTER WRAP TAPE: XUNDA-T200 Series
Type
T 250
T 265
T 280
Total thickness
0.51 mm
0.65 mm
0.80 mm
Film
0.38 mm
0.51 mm
0.63 mm
Adhesive
0.13 mm
0.14 mm
0.17 mm
Elongation at Break
³ 400%
Tensile Strength
45.3 N/cm
50.8 N/cm
60.1 N/cm
Yield Strength
35.9 N/cm
43.4 N/cm
45.8 N/cm
Dielectric Breakdown
32.9 KV/mm
43.5 KV/mm
45.2 KV/mm
Cathodic Disbandment
0.24 in radius 6.4 mm
Volume Resistivity
2.5 x 10
12
ohm.m
Water Vapor Transmission Rate
£ 0.08 gm/M
2
/24h
Water Absorption Rate
< 0.07%
Recommended Application Temperature
-5
0
to +60
0
C
Color
White
Available Roll Size (width x length)
2" to 9" X 50 to 600 feet
Description
The Polyehtylene Anticorrosion Tape 200 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines. The outer-layer tape backing shall be compounded so that it will be resistance to outdoor weathering.
The
outer-layer tape
shall be applied after the inner-layer tape by hand or with a wrapping machine.
Structure
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Outer layer: Special blend of stabilized polyethylene
Features:
Excellent adhesion to inner-layer tape and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
Cold applied
Technical datas:
OUTER WRAP TAPE: XUNDA-T200 Series
Type
T 250
T 265
T 280
Total thickness
0.51 mm
0.65 mm
0.80 mm
Film
0.38 mm
0.51 mm
0.63 mm
Adhesive
0.13 mm
0.14 mm
0.17 mm
Elongation at Break
³ 400%
Tensile Strength
45.3 N/cm
50.8 N/cm
60.1 N/cm
Yield Strength
35.9 N/cm
43.4 N/cm
45.8 N/cm
Dielectric Breakdown
32.9 KV/mm
43.5 KV/mm
45.2 KV/mm
Cathodic Disbandment
0.24 in radius 6.4 mm
Volume Resistivity
2.5 x 10
12
ohm.m
Water Vapor Transmission Rate
£ 0.08 gm/M
2
/24h
Water Absorption Rate
< 0.07%
Recommended Application Temperature
-5
0
to +60
0
C
Color
White
Available Roll Size (width x length)
2" to 9" X 50 to 600 feet
XunDa PE Outer-layer Anticorrosion Tape
We offer these PE outer-layer anticorrosion tapes in different sizes as per demands of our customers at really affordable prices
Description
The Polyehtylene Anticorrosion Tape 200 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines. The outer-layer tape backing shall be compounded so that it will be resistance to outdoor weathering.
The
outer-layer tape
shall be applied after the inner-layer tape by hand or with a wrapping machine.
Structure
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Outer layer: Special blend of stabilized polyethylene
Features:
Excellent adhesion to inner-layer tape and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
Cold applied
Technical datas:
OUTER WRAP TAPE: XUNDA-T200 Series
Type
T 250
T 265
T 280
Total thickness
0.51 mm
0.65 mm
0.80 mm
Film
0.38 mm
0.51 mm
0.63 mm
Adhesive
0.13 mm
0.14 mm
0.17 mm
Elongation at Break
³ 400%
Tensile Strength
45.3 N/cm
50.8 N/cm
60.1 N/cm
Yield Strength
35.9 N/cm
43.4 N/cm
45.8 N/cm
Dielectric Breakdown
32.9 KV/mm
43.5 KV/mm
45.2 KV/mm
Cathodic Disbandment
0.24 in radius 6.4 mm
Volume Resistivity
2.5 x 10
12
ohm.m
Water Vapor Transmission Rate
£ 0.08 gm/M
2
/24h
Water Absorption Rate
< 0.07%
Recommended Application Temperature
-5
0
to +60
0
C
Color
White
Available Roll Size (width x length)
2" to 9" X 50 to 600 feet
Description
The Polyehtylene Anticorrosion Tape 200 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines. The outer-layer tape backing shall be compounded so that it will be resistance to outdoor weathering.
The
outer-layer tape
shall be applied after the inner-layer tape by hand or with a wrapping machine.
Structure
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Outer layer: Special blend of stabilized polyethylene
Features:
Excellent adhesion to inner-layer tape and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
Cold applied
Technical datas:
OUTER WRAP TAPE: XUNDA-T200 Series
Type
T 250
T 265
T 280
Total thickness
0.51 mm
0.65 mm
0.80 mm
Film
0.38 mm
0.51 mm
0.63 mm
Adhesive
0.13 mm
0.14 mm
0.17 mm
Elongation at Break
³ 400%
Tensile Strength
45.3 N/cm
50.8 N/cm
60.1 N/cm
Yield Strength
35.9 N/cm
43.4 N/cm
45.8 N/cm
Dielectric Breakdown
32.9 KV/mm
43.5 KV/mm
45.2 KV/mm
Cathodic Disbandment
0.24 in radius 6.4 mm
Volume Resistivity
2.5 x 10
12
ohm.m
Water Vapor Transmission Rate
£ 0.08 gm/M
2
/24h
Water Absorption Rate
< 0.07%
Recommended Application Temperature
-5
0
to +60
0
C
Color
White
Available Roll Size (width x length)
2" to 9" X 50 to 600 feet
Butane Propane gas
Propane is a three-carbon alkane, normally a gas, but compressible to a liquid that is transportable.
Product Name : Propane gas
Product Category: Welding & Brazing gas
propane is a three-carbon alkane, normally a gas, but compressible to a liquid that is transportable. It is derived from other petroleum
products during oil.
Propane produces a lower flame temperature than acetylene (the maximum flame temperature in oxygen is 2,828C
compared with 3,160C for acetylene). Consequently, piercing is much slower but as the burning and slag formation
are effected by the oxygen jet, cutting speeds are about the same as for acetylene.
Product Name : Propane gas
Product Category: Welding & Brazing gas
propane is a three-carbon alkane, normally a gas, but compressible to a liquid that is transportable. It is derived from other petroleum
products during oil.
Propane produces a lower flame temperature than acetylene (the maximum flame temperature in oxygen is 2,828C
compared with 3,160C for acetylene). Consequently, piercing is much slower but as the burning and slag formation
are effected by the oxygen jet, cutting speeds are about the same as for acetylene.
Yangquan Rongwei fracturing proppant Supply
1.High crushing strength
2.Good quality &competitive price.
3.Fracturing
4.Widely used in the exploration of Oil&Gas wells
The Fracturing Proppant
is the important material in low permeability fracturing of oil and gas wells exploration .And it plays a tremendous role in the increasing production in oil (gas) field .
The Fracturing Proppant
can be widely used in hydraulic fracturing Wells ,high-pressure oil layer fracturing .Based on high quality of Bauxite which are well grinding ,mixed with various additive ,then refined ,granulation.Our products are reached the standard of
SY/T5108-2006
,in the leading of this industry.
Product Categories:
1.According to the anti-crushing strengh into 52Mpa ,69Mpa ,86Mpa ,100Mpa four series.
2.According to the volume density can be divided into :low density ,medium density,high density.
3.According to the specifications are respectively:20-40mesh,30-50mesh,40-70mesh,etc.
2.Good quality &competitive price.
3.Fracturing
4.Widely used in the exploration of Oil&Gas wells
The Fracturing Proppant
is the important material in low permeability fracturing of oil and gas wells exploration .And it plays a tremendous role in the increasing production in oil (gas) field .
The Fracturing Proppant
can be widely used in hydraulic fracturing Wells ,high-pressure oil layer fracturing .Based on high quality of Bauxite which are well grinding ,mixed with various additive ,then refined ,granulation.Our products are reached the standard of
SY/T5108-2006
,in the leading of this industry.
Product Categories:
1.According to the anti-crushing strengh into 52Mpa ,69Mpa ,86Mpa ,100Mpa four series.
2.According to the volume density can be divided into :low density ,medium density,high density.
3.According to the specifications are respectively:20-40mesh,30-50mesh,40-70mesh,etc.
camping gas can use under 20 Centigrade in the cold environment
camping gas
1.Fill with propane of the high purity,butane and specialized additive.
2.it can be used in -20 centidegree
CAMPING gasProducts No.ELK-BQ01particularly for mountain (5,000 meters above) enthusiasts, camping gas cylinder containes High-purity gas mixture 230g with propane/iso-butane, can use in -20 around in the cold environment. with a portable fire burning for 2.5 ~ 3.0 hours, the combustion flame stability, is blue and white.use method:1, removed the cover gas above the plastic cover to protect. 2, trachea flats will be tightening the joint gas cylinders in the upper part of the screw interface, so that the joint can open-top thimble of the wswitch. 3, and then joint-side edge of the switch to open a little twist, to ensure that no leakage, so that a small amount of gas from the furnace hole in the leak, rather than pressing the flats at the same time the lower end of the automatic ignition switch can be used. 4, the size of the flame can be used gas-conditioning switch.
type
bottle size (mm)
packing size(cm)
gross weight (kg)
net weight (kg)
pcs/CTN
ELK-BQ01
105*105*85
44*13*17
10
5.2
24
ELK-BQ02
105*105*85
44*13*17
10
5.2
24
1.Fill with propane of the high purity,butane and specialized additive.
2.it can be used in -20 centidegree
CAMPING gasProducts No.ELK-BQ01particularly for mountain (5,000 meters above) enthusiasts, camping gas cylinder containes High-purity gas mixture 230g with propane/iso-butane, can use in -20 around in the cold environment. with a portable fire burning for 2.5 ~ 3.0 hours, the combustion flame stability, is blue and white.use method:1, removed the cover gas above the plastic cover to protect. 2, trachea flats will be tightening the joint gas cylinders in the upper part of the screw interface, so that the joint can open-top thimble of the wswitch. 3, and then joint-side edge of the switch to open a little twist, to ensure that no leakage, so that a small amount of gas from the furnace hole in the leak, rather than pressing the flats at the same time the lower end of the automatic ignition switch can be used. 4, the size of the flame can be used gas-conditioning switch.
type
bottle size (mm)
packing size(cm)
gross weight (kg)
net weight (kg)
pcs/CTN
ELK-BQ01
105*105*85
44*13*17
10
5.2
24
ELK-BQ02
105*105*85
44*13*17
10
5.2
24
Subscribe to:
Posts (Atom)