200kw Natural gas generator set adopts advanced technologies such as electronic ignitioin system,electronic governing and so o
200kw Natural gas generator set
Model of Generating Sets
200GF-T
Model of engine
W12V138DT
Rated power(KW / KVA)
200/250
Rated speed(r/min)
1500r/min
Rated voltage (V)
400
Rated current (A)
360
Rated frequency (Hz)
50
Rated power factor
0.8 Lagging
Supply method
3 phases 4 lines
Excitation method
Brushless
Starting method
Electric motor starters
Cooling method
Closed type water cooling
Bore (mm)
138
Speed modulate method
Electronic control
Net weight (kg)
3300 Kg
Overall dimension L×B×H(mm)
3058X1325X1820mm
(Reference size only)
Thursday, October 27, 2011
75kw gas generator
75kw gas generator
1. Power Saving
2. Environment Protection
3. Reasonable price and High quality.
75kw gas generator
Model of Generating Sets
75GF-T
Model of engine
H6135DT
Rated power KW
75
Rated speed r/min.
1500r/min
Rated voltage V
400
Rated current A
135
Rated frequency Hz
50
Rated power factor
0.8 Lagging
Supply method
3 phases 4 lines
Excitation method
Brushless
Starting method
Electric motor starters
Cooling method
Closed type water cooling
Bore mm
135
Speed modulate method
Electronic control
Net weight kg
2410
Overall dimension L×B×H(mm)
2750x1010x1480mm
(Reference size only)
1. Power Saving
2. Environment Protection
3. Reasonable price and High quality.
75kw gas generator
Model of Generating Sets
75GF-T
Model of engine
H6135DT
Rated power KW
75
Rated speed r/min.
1500r/min
Rated voltage V
400
Rated current A
135
Rated frequency Hz
50
Rated power factor
0.8 Lagging
Supply method
3 phases 4 lines
Excitation method
Brushless
Starting method
Electric motor starters
Cooling method
Closed type water cooling
Bore mm
135
Speed modulate method
Electronic control
Net weight kg
2410
Overall dimension L×B×H(mm)
2750x1010x1480mm
(Reference size only)
Cummins gas genset B series 30kva
Tide Power System Co., LTD. has the ability to produce Gas generators from 24kW to 220kW with the Cummins B series engine.
Technical Specification Data
Genset
Genset Model
TCM30GB
Prime Rating (kW)
24
Standby Power (kW)
26.4
Manufacturer
Tide Power System
Engine
Engine Manufacture
CUMMINS
Engine Model
4B3.9-GB
Rated Power (kW)
26
Standby Power (kW)
30
Bore× Stock (mm)
102×120
Cylinder numbers
4
Displacement (L)
3.9
Rated Speed (r/min)
1500
Intake Method
Natural
Ignition & Governing System
Omnitek US
Gas Consumption (g/kw.h)
229
Coolant Heat (kW)
25.9
Oil pan capacity: Max-Min (L)
9.5-8.5
Coolant capacity (engine only) (L)
7.2
Starter
12V/24V
Air Intake flow (L/s)
32.8
Exhaust flow (L/s)
67.5
Alternator
Alternator
Leroy-Somer,Stamford, Marathon etc
Alternator Model
LSA42.2L9
Rated Power (kW)
25.2
Frequency (HZ)
50
Rated Voltage (V)
400/230
Rated Current (A)
43.2
Power Factor (Cosφ)
0.8
Excitation Method
Brushless
V-regulator Method
Automatic
Phase/Connection
3 Phase 4 Wire, Y-connection
Spec.
Net Weight (kg)
780
Dimension (L×W×H mm)
1650×740×1400
Technical Specification Data
Genset
Genset Model
TCM30GB
Prime Rating (kW)
24
Standby Power (kW)
26.4
Manufacturer
Tide Power System
Engine
Engine Manufacture
CUMMINS
Engine Model
4B3.9-GB
Rated Power (kW)
26
Standby Power (kW)
30
Bore× Stock (mm)
102×120
Cylinder numbers
4
Displacement (L)
3.9
Rated Speed (r/min)
1500
Intake Method
Natural
Ignition & Governing System
Omnitek US
Gas Consumption (g/kw.h)
229
Coolant Heat (kW)
25.9
Oil pan capacity: Max-Min (L)
9.5-8.5
Coolant capacity (engine only) (L)
7.2
Starter
12V/24V
Air Intake flow (L/s)
32.8
Exhaust flow (L/s)
67.5
Alternator
Alternator
Leroy-Somer,Stamford, Marathon etc
Alternator Model
LSA42.2L9
Rated Power (kW)
25.2
Frequency (HZ)
50
Rated Voltage (V)
400/230
Rated Current (A)
43.2
Power Factor (Cosφ)
0.8
Excitation Method
Brushless
V-regulator Method
Automatic
Phase/Connection
3 Phase 4 Wire, Y-connection
Spec.
Net Weight (kg)
780
Dimension (L×W×H mm)
1650×740×1400
Cummins gas genset B series 45kva
Tide Power System Co., LTD. has the ability to produce Gas generators from 24kW to 220kW with the Cummins B series engine.
Technical Specification Data
Genset
Genset Model
TCM45GB
Prime Rating (kW)
36
Standby Power (kW)
39.6
Manufacturer
Tide Power System
Engine
Engine Manufacture
CUMMINS
Engine Model
4BT3.9-GB
Rated Power (kW)
40kW
Standby Power (kW)
44
Bore× Stock (mm)
102×120
Cylinder numbers
4
Displacement (L)
3.9
Rated Speed (r/min)
1500
Intake Method
Turbocharged
Ignition & Governing System
Omnitek US
Gas Consumption (g/kw.h)
214
Coolant Heat (kW)
25.9
Oil pan capacity: Max-Min (L)
9.5-8.5
Coolant capacity (engine only) (L)
7.2
Starter
12V/24V
Air Intake flow (L/s)
43.6
Exhaust flow (L/s)
101
Alternator
Alternator
Leroy-Somer,Stamford, Marathon etc
Alternator Model
LSA43.2S25
Rated Power (kW)
36
Frequency (HZ)
50
Rated Voltage (V)
400/230
Rated Current (A)
64.8
Power Factor (Cosφ)
0.8
Excitation Method
Brushless
V-regulator Method
Automatic
Phase/Connection
3 Phase 4 Wire, Y-connection
Spec.
Net Weight (kg)
820
Dimension (L×W×H mm)
1700×740×1400
Technical Specification Data
Genset
Genset Model
TCM45GB
Prime Rating (kW)
36
Standby Power (kW)
39.6
Manufacturer
Tide Power System
Engine
Engine Manufacture
CUMMINS
Engine Model
4BT3.9-GB
Rated Power (kW)
40kW
Standby Power (kW)
44
Bore× Stock (mm)
102×120
Cylinder numbers
4
Displacement (L)
3.9
Rated Speed (r/min)
1500
Intake Method
Turbocharged
Ignition & Governing System
Omnitek US
Gas Consumption (g/kw.h)
214
Coolant Heat (kW)
25.9
Oil pan capacity: Max-Min (L)
9.5-8.5
Coolant capacity (engine only) (L)
7.2
Starter
12V/24V
Air Intake flow (L/s)
43.6
Exhaust flow (L/s)
101
Alternator
Alternator
Leroy-Somer,Stamford, Marathon etc
Alternator Model
LSA43.2S25
Rated Power (kW)
36
Frequency (HZ)
50
Rated Voltage (V)
400/230
Rated Current (A)
64.8
Power Factor (Cosφ)
0.8
Excitation Method
Brushless
V-regulator Method
Automatic
Phase/Connection
3 Phase 4 Wire, Y-connection
Spec.
Net Weight (kg)
820
Dimension (L×W×H mm)
1700×740×1400
Cummins gas genset B series 63kva
Tide Power System Co., LTD. has the ability to produce Gas generators from 24kW to 220kW with the Cummins B series engine.
Technical Specification Data
Genset
Genset Model
TCM63GB
Prime Rating (kW)
50
Standby Power (kW)
55
Manufacturer
Tide Power System
Engine
Engine Manufacture
CUMMINS
Engine Model
4BTA3.9-GB
Rated Power (kW)
55
Standby Power (kW)
61
Bore× Stock (mm)
102×120
Cylinder numbers
4
Displacement (L)
3.9
Rated Speed (r/min)
1500
Intake Method
Turbocharged, air-water inter-cooled
Ignition & Governing System
Omnitek US
Gas Consumption (g/kw.h)
214
Coolant Heat (kW)
25.9
Oil pan capacity: Max-Min
9.5-8.5L
Coolant capacity (engine only) (L)
7.2
Starter
12V/24V
Air Intake flow (L/s)
48
Exhaust flow (L/s)
130
Alternator
Alternator
Leroy-Somer,Stamford, Marathon etc
Alternator Model
LSA43.2L65
Rated Power (kW)
56
Frequency (HZ)
50
Rated Voltage (V)
400/230
Rated Current (A)
91
Power Factor (Cosφ)
0.8
Excitation Method
Brushless
V-regulator Method
Automatic
Phase/Connection
3 Phase 4 Wire, Y-connection
Spec.
Net Weight (kg)
900
Dimension (L×W×H mm)
1750×740×1400
Technical Specification Data
Genset
Genset Model
TCM63GB
Prime Rating (kW)
50
Standby Power (kW)
55
Manufacturer
Tide Power System
Engine
Engine Manufacture
CUMMINS
Engine Model
4BTA3.9-GB
Rated Power (kW)
55
Standby Power (kW)
61
Bore× Stock (mm)
102×120
Cylinder numbers
4
Displacement (L)
3.9
Rated Speed (r/min)
1500
Intake Method
Turbocharged, air-water inter-cooled
Ignition & Governing System
Omnitek US
Gas Consumption (g/kw.h)
214
Coolant Heat (kW)
25.9
Oil pan capacity: Max-Min
9.5-8.5L
Coolant capacity (engine only) (L)
7.2
Starter
12V/24V
Air Intake flow (L/s)
48
Exhaust flow (L/s)
130
Alternator
Alternator
Leroy-Somer,Stamford, Marathon etc
Alternator Model
LSA43.2L65
Rated Power (kW)
56
Frequency (HZ)
50
Rated Voltage (V)
400/230
Rated Current (A)
91
Power Factor (Cosφ)
0.8
Excitation Method
Brushless
V-regulator Method
Automatic
Phase/Connection
3 Phase 4 Wire, Y-connection
Spec.
Net Weight (kg)
900
Dimension (L×W×H mm)
1750×740×1400
DAEWOO Series Gas Genset
Tide Power System Co., LTD. gas genset has so many features such as widely adoption of gas, high average effective pressure.
Output Power 50Hz/400V 60Hz/440V
Prime Power
kVA
315
360
kW
252
288
Standby Power
kVA
347
396
kW
278
317
Dimension
mm
3000X1390X1820
Weight
kg
2580
Engine Data
Manufacturer
DAEWOO
Engine Model
GV180TIR
No. of Cylinders and Configuration
10 V Type
Displacement
L
18.273
Bore × Stroke
mm
128×142
Compression Ratio
10.5:1
Aspiration
Turbocharged and Intercooled (Water to Air)
Governor Type
Electronic
Cooling System
Water
Coolant Capacity
L
238
Lubrication Oil Capacity
L
35
Electrical System
VDC
24
Speed/Frequency
rpm/Hz
1500/50
1800/60
Engine Gross Power
kW
319
375
Fuel Consumption Nm
3
/h
110% loading
80.5
99.5
100% loading
74.7
90.8
75% loading
57.4
71.7
50% loading
41.5
50.6
Exhaust Outlet Temp.
520
530
Exhaust Gas Flow
m
3
/min
30
37.8
Combustion Air Flow
m
3
/min
38.8
47.9
Cooling Air Flow
m
3
/min
23.9
29.4
Alternator
Manufacturer
Leroy-Somer
Model
LSA46.2VL12
Phase and Wire
3 Phase 4Wire
Power Factor
0.8
No. of Poles
4
No. of Leads
12
Insulation Class
H
Protection Class
IP23
Frequency
Hz
50Hz
60Hz
Voltage
400V/230V
440V/254V
Rated Power
kW
252
298
Output Power 50Hz/400V 60Hz/440V
Prime Power
kVA
315
360
kW
252
288
Standby Power
kVA
347
396
kW
278
317
Dimension
mm
3000X1390X1820
Weight
kg
2580
Engine Data
Manufacturer
DAEWOO
Engine Model
GV180TIR
No. of Cylinders and Configuration
10 V Type
Displacement
L
18.273
Bore × Stroke
mm
128×142
Compression Ratio
10.5:1
Aspiration
Turbocharged and Intercooled (Water to Air)
Governor Type
Electronic
Cooling System
Water
Coolant Capacity
L
238
Lubrication Oil Capacity
L
35
Electrical System
VDC
24
Speed/Frequency
rpm/Hz
1500/50
1800/60
Engine Gross Power
kW
319
375
Fuel Consumption Nm
3
/h
110% loading
80.5
99.5
100% loading
74.7
90.8
75% loading
57.4
71.7
50% loading
41.5
50.6
Exhaust Outlet Temp.
520
530
Exhaust Gas Flow
m
3
/min
30
37.8
Combustion Air Flow
m
3
/min
38.8
47.9
Cooling Air Flow
m
3
/min
23.9
29.4
Alternator
Manufacturer
Leroy-Somer
Model
LSA46.2VL12
Phase and Wire
3 Phase 4Wire
Power Factor
0.8
No. of Poles
4
No. of Leads
12
Insulation Class
H
Protection Class
IP23
Frequency
Hz
50Hz
60Hz
Voltage
400V/230V
440V/254V
Rated Power
kW
252
298
DEUTZ gas genset 30kva
Tide Power System Co., LTD. has so many features such as widely adoption of gas, high average effective pressure, low heat load
Technical Specification Data
Genset
Genset Model
TDE30G
Prime Rating (kW)
24
Standby Power (kW)
26.4
Heat Consumption (MJ/kWh)
12
Engine
Engine Manufacture
DEUTZ
Engine Model
TBD226B-3DG
Bore× Stock (mm)
105×120
Cylinder numbers
3
Rated Speed (r/min)
1500
12-hour Power (kW)
37
Intaking Method
Turbocharged
Reference Gas Consumption (m
3
/h)
10
Reference Air Consumption (m
3
/h)
125
Coolant Heat (kW)
27.2
Coolant Flux (kg/s)
1.1
Fan-air Flux (m
3
/h)
1.9
Exhaust Flux (m
3
/h)
401
Starting Method
Electrical Starting
Alternator
Alternator
Leroy-Somer, Siemens, Marathon etc
Alternator Model
UCI224C
Rated Power (kW)
34
Frequency (HZ)
50
Rated Voltage (V)
400/230
Rated Current (A)
61
Power Factor (cosφ)
0.8
Excitation Method
Brushless
V-regulator Method
Automatic
Phase/Connection
3 Phase 4 Wire, Y-connection
Spec
Net Weight (kg)
760
Dimension (L×W×H mm)
1900×788×1200
Technical Specification Data
Genset
Genset Model
TDE30G
Prime Rating (kW)
24
Standby Power (kW)
26.4
Heat Consumption (MJ/kWh)
12
Engine
Engine Manufacture
DEUTZ
Engine Model
TBD226B-3DG
Bore× Stock (mm)
105×120
Cylinder numbers
3
Rated Speed (r/min)
1500
12-hour Power (kW)
37
Intaking Method
Turbocharged
Reference Gas Consumption (m
3
/h)
10
Reference Air Consumption (m
3
/h)
125
Coolant Heat (kW)
27.2
Coolant Flux (kg/s)
1.1
Fan-air Flux (m
3
/h)
1.9
Exhaust Flux (m
3
/h)
401
Starting Method
Electrical Starting
Alternator
Alternator
Leroy-Somer, Siemens, Marathon etc
Alternator Model
UCI224C
Rated Power (kW)
34
Frequency (HZ)
50
Rated Voltage (V)
400/230
Rated Current (A)
61
Power Factor (cosφ)
0.8
Excitation Method
Brushless
V-regulator Method
Automatic
Phase/Connection
3 Phase 4 Wire, Y-connection
Spec
Net Weight (kg)
760
Dimension (L×W×H mm)
1900×788×1200
DOT standard CNG Cylinder
DOT standart CNG cylinder .work pressure 3600PSI. NGV cylinder valve .
DOT standart CNG cylinder work pressure is higher than ISO11439:2000 in according ANSI complllent request. The CNG cylinder must with DOT-3AA stamping on body .
CNG cylinder under DOT standart have following request
Work pressure 3600PSI
Test Pressure 4200PSI
SYP offer CNG cylinder /NGV cylinder with DOT-3AA stamping . the seriese cover Type 1 steel cylinder, Type 2 galss fiber wrapped cng cylinder .
we offer 325 serise 60L, 80L,90L,100L type 2 CNG cylinder with DOT approve ,50,60,70,80,90,100,120,145L type 1 CNG steel cylinder
SYP also offer customer the EPA request mutivevalve for DOT cylinder .please contact with us for more information
DOT standart CNG cylinder work pressure is higher than ISO11439:2000 in according ANSI complllent request. The CNG cylinder must with DOT-3AA stamping on body .
CNG cylinder under DOT standart have following request
Work pressure 3600PSI
Test Pressure 4200PSI
SYP offer CNG cylinder /NGV cylinder with DOT-3AA stamping . the seriese cover Type 1 steel cylinder, Type 2 galss fiber wrapped cng cylinder .
we offer 325 serise 60L, 80L,90L,100L type 2 CNG cylinder with DOT approve ,50,60,70,80,90,100,120,145L type 1 CNG steel cylinder
SYP also offer customer the EPA request mutivevalve for DOT cylinder .please contact with us for more information
Deep Dehydration Device Of Natural Gas
Is especially used for deep dehydration of natural gas in CNG gas filling station
The general technical parameters that can be meet by the deep dehydration device of natural gas
1.Model Low-pressure front, ultra low pressure front, large water content, super flow, high pressure postposition etc.
2. Equipment design working pressure range
3. Maximum handing ability6000Nm
3
/h(1.0mpa)
4. Working environment temperature -30 50°C
5 .Design temperature 345°C
6. Renewable heating temperature 210~230 °C
7. Product gas ordinary pressure dew point ≤-60°C
8.Maximum water content of raw material gas≤3500PPmv
9. Equipment overall pressure drop ≤0.03MPa
10.Adsorbent Molecular sieve
11.Regenerative method Built-in electric furnace, closed loop recycling
12.Cooling-down method Air-cooled or water cooled
13. Number of drying tower 2-4 tower
14.Class of explosive-proof dIIBT4
15. Level of protection IP64
16. Power requirements 380V±7%
17.Electric power around 40% smaller than other similar manufacturers
18.Control method Dedicated control cabinet, manual switching, automatic regeneration, manual discharge
19. Equipment noise ≤70 decibel
20.Measures to Ambient temperature is below 5 prevent ice block 5 °C heating band automatically
21.Fixed mode ship-shaped skid base, without to fix, easy to install
Descriptions of features and performance of equipment
1. Equipment imported the advanced technology from Italy and the United States, novel structure, easy operation, maintenance-free after commissioning. Using the 2 to 4 tower structure for the same equipment, single-stage adsorption, can handle high water content and large flows of feed gas, big quantity of adsorption, long cycle of adsorption, low depth of dehydration, can be operate continuously, continuous output of normal atmospheric dew point lower than -60°C purity, dry gas . Eliminate duplication investment of purchase multiple equipment.
2. The unique closed-loop recycling technology, built-in electric furnace, gas through the heater, flow of gas is slow, heating time is long, with high heating efficiency, heat evenly, small heat loss, to ensure full utilization of energy and greatly reduce the electric power and renewable energy, heater power is accompanied about 60% of other manufacturers. Electric furnace with constant temperature design, the entire regeneration process control at a constant heating temperature range, avoid the damage and loss of power of the electric furnace itself by frequent starting and stopping, effectively reducing the operating costs, extend equipment’s service life.
3. Vessel shell design, manufacture, testing, acceptance according to GB150 <Steel pressure vessels>, and the State Quality and Technical Supervision issued by the <Pressure Vessel Safety Technology supervision order>. Provide a full set of the required documentation of pressure vessels.
4. Original container and furnace design, ensuring smooth gas flow, bed stability, and elimination of damage to the container due to heating or cooling; absorption tower using 16 MnR material, resistant to fatigue, to run at low pressure, the container services for a more longer time.
5. Drying tower configured a filter can effectively remove the particulate component of natural gas , outlet with a fine filter, to prevent secondary pollution caused by adsorbent off, reducing the duplication process pipeline, reducing the pressure drop of equipment, saving the user’s investment cost.
6.This device is equipped with special cabinet, can accurately control the temperature when regenerating the device process, and in accordance with set procedures for movement control regeneration system; control panel set regenerate manual and automatic mode, and manually comes priority. When the regeneration is cycling, it can start or stop the heater, cooler at any time according to actual needs. Control procedures into the work order and interlocking relationships, to avoid human errors caused the losses. Based on the cooling fan, it has set up and down line running between temperature, to ensure the regeneration system does not over-temperature, regenerative heat exchanger does not ice block in winter, and the dew point temperature and dry gas can be observed.
7. For control system, except drying tower, switchover of regeneration tower need manual valve, all other actions will be automatically by the device. When the work tower is adsorbing, output dry gas; when regeneration tower is adsorbing, use a control valve to control the heating temperature of heater, when the regeneration has been finished, heater will automatically stop heating, start doing cold blow, when the temperature inside of the tower blow to the set temperature, the control cabinet will automatically stop all running power system, complete regeneration; all the control parameter can be remodify on controller, flexible and easy.
8. On drying tower device has set pressure gauge, temperature meter, visual display of work pressure and regeneration temperature and other working conditions; drying tower absorption tower has set discharge port with dedicated loading, easy replacement of filling.
9. Drying tower covered with high efficient insulation coating, good effect of insulation, beautiful looking.
10. Electric heating elements are using stainless steel material, thermal conductivity of large area, heating pipe with long service life,ensured that it’s working life will not less than 3 years.
11.Cooler adopts air-cooled efficient plate heat exchanger, it is 2500~4000 M
2
/M
3
higher than surface area. Compared with the same heat transfer area of the tube-fin heat exchanger, the volume was reduced 1.3 times, weight has reduced of more than 1 time.
12. Power generation location of device is reasonable, focus on external connection, produced according DIIBT4 explosion levels.
13.Galvanized pipe through the paint treatment, outdoor installation, long-term use does not fade.
The general technical parameters that can be meet by the deep dehydration device of natural gas
1.Model Low-pressure front, ultra low pressure front, large water content, super flow, high pressure postposition etc.
2. Equipment design working pressure range
3. Maximum handing ability6000Nm
3
/h(1.0mpa)
4. Working environment temperature -30 50°C
5 .Design temperature 345°C
6. Renewable heating temperature 210~230 °C
7. Product gas ordinary pressure dew point ≤-60°C
8.Maximum water content of raw material gas≤3500PPmv
9. Equipment overall pressure drop ≤0.03MPa
10.Adsorbent Molecular sieve
11.Regenerative method Built-in electric furnace, closed loop recycling
12.Cooling-down method Air-cooled or water cooled
13. Number of drying tower 2-4 tower
14.Class of explosive-proof dIIBT4
15. Level of protection IP64
16. Power requirements 380V±7%
17.Electric power around 40% smaller than other similar manufacturers
18.Control method Dedicated control cabinet, manual switching, automatic regeneration, manual discharge
19. Equipment noise ≤70 decibel
20.Measures to Ambient temperature is below 5 prevent ice block 5 °C heating band automatically
21.Fixed mode ship-shaped skid base, without to fix, easy to install
Descriptions of features and performance of equipment
1. Equipment imported the advanced technology from Italy and the United States, novel structure, easy operation, maintenance-free after commissioning. Using the 2 to 4 tower structure for the same equipment, single-stage adsorption, can handle high water content and large flows of feed gas, big quantity of adsorption, long cycle of adsorption, low depth of dehydration, can be operate continuously, continuous output of normal atmospheric dew point lower than -60°C purity, dry gas . Eliminate duplication investment of purchase multiple equipment.
2. The unique closed-loop recycling technology, built-in electric furnace, gas through the heater, flow of gas is slow, heating time is long, with high heating efficiency, heat evenly, small heat loss, to ensure full utilization of energy and greatly reduce the electric power and renewable energy, heater power is accompanied about 60% of other manufacturers. Electric furnace with constant temperature design, the entire regeneration process control at a constant heating temperature range, avoid the damage and loss of power of the electric furnace itself by frequent starting and stopping, effectively reducing the operating costs, extend equipment’s service life.
3. Vessel shell design, manufacture, testing, acceptance according to GB150 <Steel pressure vessels>, and the State Quality and Technical Supervision issued by the <Pressure Vessel Safety Technology supervision order>. Provide a full set of the required documentation of pressure vessels.
4. Original container and furnace design, ensuring smooth gas flow, bed stability, and elimination of damage to the container due to heating or cooling; absorption tower using 16 MnR material, resistant to fatigue, to run at low pressure, the container services for a more longer time.
5. Drying tower configured a filter can effectively remove the particulate component of natural gas , outlet with a fine filter, to prevent secondary pollution caused by adsorbent off, reducing the duplication process pipeline, reducing the pressure drop of equipment, saving the user’s investment cost.
6.This device is equipped with special cabinet, can accurately control the temperature when regenerating the device process, and in accordance with set procedures for movement control regeneration system; control panel set regenerate manual and automatic mode, and manually comes priority. When the regeneration is cycling, it can start or stop the heater, cooler at any time according to actual needs. Control procedures into the work order and interlocking relationships, to avoid human errors caused the losses. Based on the cooling fan, it has set up and down line running between temperature, to ensure the regeneration system does not over-temperature, regenerative heat exchanger does not ice block in winter, and the dew point temperature and dry gas can be observed.
7. For control system, except drying tower, switchover of regeneration tower need manual valve, all other actions will be automatically by the device. When the work tower is adsorbing, output dry gas; when regeneration tower is adsorbing, use a control valve to control the heating temperature of heater, when the regeneration has been finished, heater will automatically stop heating, start doing cold blow, when the temperature inside of the tower blow to the set temperature, the control cabinet will automatically stop all running power system, complete regeneration; all the control parameter can be remodify on controller, flexible and easy.
8. On drying tower device has set pressure gauge, temperature meter, visual display of work pressure and regeneration temperature and other working conditions; drying tower absorption tower has set discharge port with dedicated loading, easy replacement of filling.
9. Drying tower covered with high efficient insulation coating, good effect of insulation, beautiful looking.
10. Electric heating elements are using stainless steel material, thermal conductivity of large area, heating pipe with long service life,ensured that it’s working life will not less than 3 years.
11.Cooler adopts air-cooled efficient plate heat exchanger, it is 2500~4000 M
2
/M
3
higher than surface area. Compared with the same heat transfer area of the tube-fin heat exchanger, the volume was reduced 1.3 times, weight has reduced of more than 1 time.
12. Power generation location of device is reasonable, focus on external connection, produced according DIIBT4 explosion levels.
13.Galvanized pipe through the paint treatment, outdoor installation, long-term use does not fade.
Wednesday, October 26, 2011
Deutz gas genset 45kva
Tide Power System Co., LTD. has so many features such as widely adoption of gas, high average effective pressure, low heat load
Technical Specification Data
Genset
Genset Model
TDE45G
Prime Rating (kW)
36
Standby Power (kW)
40
Heat Consumption (MJ/kWh)
12
Engine
Engine Manufacture
DEUTZ
Engine Model
TBD226B-4DG
Bore× Stock (mm)
105×120
Cylinder numbers
4
Rated Speed (r/min)
1500
12-hour Power (kW)
48
Intaking Method
Turbocharged
Reference Gas Consumption (m
3
/h)
14
Reference Air Consumption (m
3
/h)
168
Coolant Heat (kW)
36.6
Coolant Flux (kg/s)
1.4
Fan-air Flux (m
3
/h)
2.5
Exhaust Flux (m
3
/h)
538
Starting Method
Electrical Starting
Alternator
Alternator
Leroy-Somer, Siemens, Marathon etc
Alternator Model
UCI224E
Rated Power (kW)
48
Frequency (HZ)
50
Rated Voltage (V)
400/230
Rated Current (A)
87
Power Factor (cosφ)
0.8
Excitation Method
Brushless
V-regulator Method
Automatic
Phase/Connection
3 Phase 4 Wire, Y-connection
Spec
Net Weight (kg)
860
Dimension (L×W×H mm)
1950×788×1400
Technical Specification Data
Genset
Genset Model
TDE45G
Prime Rating (kW)
36
Standby Power (kW)
40
Heat Consumption (MJ/kWh)
12
Engine
Engine Manufacture
DEUTZ
Engine Model
TBD226B-4DG
Bore× Stock (mm)
105×120
Cylinder numbers
4
Rated Speed (r/min)
1500
12-hour Power (kW)
48
Intaking Method
Turbocharged
Reference Gas Consumption (m
3
/h)
14
Reference Air Consumption (m
3
/h)
168
Coolant Heat (kW)
36.6
Coolant Flux (kg/s)
1.4
Fan-air Flux (m
3
/h)
2.5
Exhaust Flux (m
3
/h)
538
Starting Method
Electrical Starting
Alternator
Alternator
Leroy-Somer, Siemens, Marathon etc
Alternator Model
UCI224E
Rated Power (kW)
48
Frequency (HZ)
50
Rated Voltage (V)
400/230
Rated Current (A)
87
Power Factor (cosφ)
0.8
Excitation Method
Brushless
V-regulator Method
Automatic
Phase/Connection
3 Phase 4 Wire, Y-connection
Spec
Net Weight (kg)
860
Dimension (L×W×H mm)
1950×788×1400
Deutz gas genset 90KVA
Tide Power System Co., LTD. has so many features such as widely adoption of gas, high average effective pressure, low heat load
Technical Specification Data
Genset
Genset Model
TDE90G
Prime Rating (kW)
72
Standby Power (kW)
79
Heat Consumption (MJ/kWh)
12
Engine
Engine Manufacture
DEUTZ
Engine Model
TBD226B-6DG
Bore× Stock (mm)
105×120
Cylinder numbers
6
Rated Speed (r/min)
1500
12-hour Power (kW)
100
Intaking Method
Turbocharged Intercooled
Reference Gas Consumption (m
3
/h)
29
Reference Air Consumption (m
3
/h)
356
Coolant Heat (kW)
77.4
Coolant Flux (kg/s)
3.1
Fan-air Flux (m
3
/h)
5.3
Exhaust Flux (m
3
/h)
1139
Starting Method
Electrical Starting
Alternator
Alternator
Leroy-Somer, Siemens, Marathon etc
Alternator Model
UCI274D
Rated Power (kW)
96
Frequency (HZ)
50
Rated Voltage (V)
400/230
Rated Current (A)
173
Power Factor (cosφ)
0.8
Excitation Method
Brushless
V-regulator Method
Automatic
Phase/Connection
3 Phase 4 Wire, Y-connection
Spec
Net Weight (kg)
1290
Dimension (L×W×H mm)
2400×788×1450
Technical Specification Data
Genset
Genset Model
TDE90G
Prime Rating (kW)
72
Standby Power (kW)
79
Heat Consumption (MJ/kWh)
12
Engine
Engine Manufacture
DEUTZ
Engine Model
TBD226B-6DG
Bore× Stock (mm)
105×120
Cylinder numbers
6
Rated Speed (r/min)
1500
12-hour Power (kW)
100
Intaking Method
Turbocharged Intercooled
Reference Gas Consumption (m
3
/h)
29
Reference Air Consumption (m
3
/h)
356
Coolant Heat (kW)
77.4
Coolant Flux (kg/s)
3.1
Fan-air Flux (m
3
/h)
5.3
Exhaust Flux (m
3
/h)
1139
Starting Method
Electrical Starting
Alternator
Alternator
Leroy-Somer, Siemens, Marathon etc
Alternator Model
UCI274D
Rated Power (kW)
96
Frequency (HZ)
50
Rated Voltage (V)
400/230
Rated Current (A)
173
Power Factor (cosφ)
0.8
Excitation Method
Brushless
V-regulator Method
Automatic
Phase/Connection
3 Phase 4 Wire, Y-connection
Spec
Net Weight (kg)
1290
Dimension (L×W×H mm)
2400×788×1450
Dispenser
CNG dispenser standard refueling station
cost saving and environment friendly
CNG Dispenser Standard Refueling Station
Model:
JQDS-30A(3MBW)
Measuring accuracies
±0.5%
Range of flow
2～30Nm3/min /Gun
Rated working pressure
20Mpa
Maximum working pressure
25Mpa
Design pressure
27.5Mpa
Refueling pressure
20Mpa
Volume for single charging
9999.99 m
3
Volume for accumulation
99999999.99 m
3
Intensity of pressure resistance
37.5Mpa
Work power source
220V±20% 50Hz±1Hz
Packing dimension:
1200×740×2100
Measuring unit
It can be set according to client’s requirements.
CNG Dispenser Standard Refueling Station
Model:
JQDS-30A(3MBW)
Measuring accuracies
±0.5%
Range of flow
2～30Nm3/min /Gun
Rated working pressure
20Mpa
Maximum working pressure
25Mpa
Design pressure
27.5Mpa
Refueling pressure
20Mpa
Volume for single charging
9999.99 m
3
Volume for accumulation
99999999.99 m
3
Intensity of pressure resistance
37.5Mpa
Explosion-proof rank
Exibdme Two AT4
Work power source
220V±20% 50Hz±1Hz
Power
Less than 200W
Packing dimension:
1200×740×2100
Measuring unit
It can be set according to client’s requirements.
cost saving and environment friendly
CNG Dispenser Standard Refueling Station
Model:
JQDS-30A(3MBW)
Measuring accuracies
±0.5%
Range of flow
2～30Nm3/min /Gun
Rated working pressure
20Mpa
Maximum working pressure
25Mpa
Design pressure
27.5Mpa
Refueling pressure
20Mpa
Volume for single charging
9999.99 m
3
Volume for accumulation
99999999.99 m
3
Intensity of pressure resistance
37.5Mpa
Work power source
220V±20% 50Hz±1Hz
Packing dimension:
1200×740×2100
Measuring unit
It can be set according to client’s requirements.
CNG Dispenser Standard Refueling Station
Model:
JQDS-30A(3MBW)
Measuring accuracies
±0.5%
Range of flow
2～30Nm3/min /Gun
Rated working pressure
20Mpa
Maximum working pressure
25Mpa
Design pressure
27.5Mpa
Refueling pressure
20Mpa
Volume for single charging
9999.99 m
3
Volume for accumulation
99999999.99 m
3
Intensity of pressure resistance
37.5Mpa
Explosion-proof rank
Exibdme Two AT4
Work power source
220V±20% 50Hz±1Hz
Power
Less than 200W
Packing dimension:
1200×740×2100
Measuring unit
It can be set according to client’s requirements.
75kw genset
genset advantages
1. Power Saving
2. Environment Protection
3. Reasonable price and High quality.
75kw
genset
for natural gas
Model of Generating Sets
75GF-T
Model of engine
H6135DT
Rated power KW
75
Rated speed r/min.
1500r/min
Rated voltage V
400
Rated current A
135
Rated frequency Hz
50
Rated power factor
0.8 Lagging
Supply method
3 phases 4 lines
Excitation method
Brushless
Starting method
Electric motor starters
Cooling method
Closed type water cooling
Bore mm
135
Speed modulate method
Electronic control
Net weight kg
2410
Overall dimension L×B×H(mm)
2750x1010x1480mm
(Reference size only)
1. Power Saving
2. Environment Protection
3. Reasonable price and High quality.
75kw
genset
for natural gas
Model of Generating Sets
75GF-T
Model of engine
H6135DT
Rated power KW
75
Rated speed r/min.
1500r/min
Rated voltage V
400
Rated current A
135
Rated frequency Hz
50
Rated power factor
0.8 Lagging
Supply method
3 phases 4 lines
Excitation method
Brushless
Starting method
Electric motor starters
Cooling method
Closed type water cooling
Bore mm
135
Speed modulate method
Electronic control
Net weight kg
2410
Overall dimension L×B×H(mm)
2750x1010x1480mm
(Reference size only)
Extrusive PVDF rod
So far, our company has successfully developed d3-d300mm of PVDF extrusive rod ,widely used in various fields .
tem
thinckness
width
length
Application
Stamped sheet
1-50mm
100-1000mm
100-2000mm
insulating parts,anticorrosivelining
seal
Extrusion sheet
0.05-0.5
≤500
≥10000
PVDF sheet ,Board conforms to the respective standards
Item
Dia
Length
Application
Stamping rod
5-20
200
In-process antisepsis,steel ,insulating component
25-100
100-150
Extrusion tube
3-150
≥4000
Pipeline for corrosive liquid and gas, protecting tube for Electric wire
PVDF rod and tube conforms to the respective standards .
tem
thinckness
width
length
Application
Stamped sheet
1-50mm
100-1000mm
100-2000mm
insulating parts,anticorrosivelining
seal
Extrusion sheet
0.05-0.5
≤500
≥10000
PVDF sheet ,Board conforms to the respective standards
Item
Dia
Length
Application
Stamping rod
5-20
200
In-process antisepsis,steel ,insulating component
25-100
100-150
Extrusion tube
3-150
≥4000
Pipeline for corrosive liquid and gas, protecting tube for Electric wire
PVDF rod and tube conforms to the respective standards .
FEP wire
FEP wire
resistance to high temperature.
high chemical stability
the insulating property is good.
Fluorinated ethylene propylene(FEP
,
F46) products
FEP is a modified category of PTFE. It remains basically the properties of PTFE, like excellent high- low-temperature resistance, chemical stability, dielectricity, high non-adhesiveness and mechanical strength. Compare to PTFE, it has better elasticity and transparency and is only 50 lower than PTFE by limit of high temperature resistance.
Main technical indicators of FEP
Indicator
Unit
Indicator figure
Rod, sheet
Tube, membrane
density
g/cm
3
2.14-2.17
Tensile strength
Mpa
20
14
Ultimate elongation
%
200
175
Temperature range
°C
- 196-200
Dielectricity strength
Kv/mm
15
Specification and application of FEP products
FEP sheet, membrane unit:mm
Type
Thickness
width
length
Application
Molded sheet
1—50
100—400
100—400
Anti-corrosion, seal, antifriction, insulation parts
Blow molded membrane
0.03—0.2
≤600
≥10000
Anti-corrosion, anti-adhesiveness, photic parts, capacitor insulation
Extruded sheet
0.05—0.5
≤500
≥10000
FEP sheet, membrane is compatible to corresponding standard.
resistance to high temperature.
high chemical stability
the insulating property is good.
Fluorinated ethylene propylene(FEP
,
F46) products
FEP is a modified category of PTFE. It remains basically the properties of PTFE, like excellent high- low-temperature resistance, chemical stability, dielectricity, high non-adhesiveness and mechanical strength. Compare to PTFE, it has better elasticity and transparency and is only 50 lower than PTFE by limit of high temperature resistance.
Main technical indicators of FEP
Indicator
Unit
Indicator figure
Rod, sheet
Tube, membrane
density
g/cm
3
2.14-2.17
Tensile strength
Mpa
20
14
Ultimate elongation
%
200
175
Temperature range
°C
- 196-200
Dielectricity strength
Kv/mm
15
Specification and application of FEP products
FEP sheet, membrane unit:mm
Type
Thickness
width
length
Application
Molded sheet
1—50
100—400
100—400
Anti-corrosion, seal, antifriction, insulation parts
Blow molded membrane
0.03—0.2
≤600
≥10000
Anti-corrosion, anti-adhesiveness, photic parts, capacitor insulation
Extruded sheet
0.05—0.5
≤500
≥10000
FEP sheet, membrane is compatible to corresponding standard.
Fleet cng fuleing compressor SYP-C-12-P36
CNG compressor for fleet use , 220V ,1 phase power, 17A , work presure 3600 PSI . complet cng fuleing sytem with UL/CSA approve
SYP clean energy cng home fueling station with the new update in according to CSA/UL standard. With 1000 hours durability life testing . SYP give customer the 4000 Hours warrnaty for long term running running process for our customer
All SYP cng home fueling station we offer to customer is complet set : . including :
CNG compresosr unit, safe manage control panel. high presusre fueling hose and autoblow down system
All the design and life test is base on
CSA/UL standard . NFPA 52 /70/UL519 standard
All the insall and warranty process :
will be handle by our authorized distributor
Average discharge volume is from :
2 GGGE to 3.4GGE /Hours
Averagne power consume
4.4Kw
Inlet presure base on
5 PSI to 45 PSI
Work presusre
3600 PSI
Auto blow down system including
: 3600 PSI auto blow down valve
Fuel Nozzle :
NGV-2 approve by ANGI , Work pressure 3600 PSI
Control Systme :
Automaitc working sytem with Safe management PLC unit
Easy operate system :
Touch screen for easy operate
Work Power
220V 1 phase for redidentail garage install / 17 A
We product the best cng home fueling statoin in according to legal way with CSA/UL approve . Please contact with us or our distributor for the new design order . please ensure the distribuotr is with SYP authorized
CNG home fueling station deal with hazard gas during high pressure. Please ensure the install process is meet UL519/NFPA52 for residential garage or Outdoor in according to Federal law.
SYP distributor would like support you install the station with legal way. Please reference our authorized agency from our website
www.sypcleanenergy.com
SYP clean energy cng home fueling station with the new update in according to CSA/UL standard. With 1000 hours durability life testing . SYP give customer the 4000 Hours warrnaty for long term running running process for our customer
All SYP cng home fueling station we offer to customer is complet set : . including :
CNG compresosr unit, safe manage control panel. high presusre fueling hose and autoblow down system
All the design and life test is base on
CSA/UL standard . NFPA 52 /70/UL519 standard
All the insall and warranty process :
will be handle by our authorized distributor
Average discharge volume is from :
2 GGGE to 3.4GGE /Hours
Averagne power consume
4.4Kw
Inlet presure base on
5 PSI to 45 PSI
Work presusre
3600 PSI
Auto blow down system including
: 3600 PSI auto blow down valve
Fuel Nozzle :
NGV-2 approve by ANGI , Work pressure 3600 PSI
Control Systme :
Automaitc working sytem with Safe management PLC unit
Easy operate system :
Touch screen for easy operate
Work Power
220V 1 phase for redidentail garage install / 17 A
We product the best cng home fueling statoin in according to legal way with CSA/UL approve . Please contact with us or our distributor for the new design order . please ensure the distribuotr is with SYP authorized
CNG home fueling station deal with hazard gas during high pressure. Please ensure the install process is meet UL519/NFPA52 for residential garage or Outdoor in according to Federal law.
SYP distributor would like support you install the station with legal way. Please reference our authorized agency from our website
www.sypcleanenergy.com
Gas Dehydration Device
Is especially used for deep dehydration of natural gas in CNG gas filling station
The general technical parameters that can be meet by the deep dehydration device of natural gas
1.Model Low-pressure front, ultra low pressure front, large water content, super flow, high pressure postposition etc.
2. Equipment design working pressure range
3. Maximum handing ability6000Nm
3
/h(1.0mpa)
4. Working environment temperature -30 50°C
5 .Design temperature 345°C
6. Renewable heating temperature 210~230 °C
7. Product gas ordinary pressure dew point ≤-60°C
8.Maximum water content of raw material gas≤3500PPmv
9. Equipment overall pressure drop ≤0.03MPa
10.Adsorbent Molecular sieve
11.Regenerative method Built-in electric furnace, closed loop recycling
12.Cooling-down method Air-cooled or water cooled
13. Number of drying tower 2-4 tower
14.Class of explosive-proof dIIBT4
15. Level of protection IP64
16. Power requirements 380V±7%
17.Electric power around 40% smaller than other similar manufacturers
18.Control method Dedicated control cabinet, manual switching, automatic regeneration, manual discharge
19. Equipment noise ≤70 decibel
20.Measures to Ambient temperature is below 5 prevent ice block 5 °C heating band automatically
21.Fixed mode ship-shaped skid base, without to fix, easy to install
Descriptions of features and performance of equipment
1. Equipment imported the advanced technology from Italy and the United States, novel structure, easy operation, maintenance-free after commissioning. Using the 2 to 4 tower structure for the same equipment, single-stage adsorption, can handle high water content and large flows of feed gas, big quantity of adsorption, long cycle of adsorption, low depth of dehydration, can be operate continuously, continuous output of normal atmospheric dew point lower than -60°C purity, dry gas . Eliminate duplication investment of purchase multiple equipment.
2. The unique closed-loop recycling technology, built-in electric furnace, gas through the heater, flow of gas is slow, heating time is long, with high heating efficiency, heat evenly, small heat loss, to ensure full utilization of energy and greatly reduce the electric power and renewable energy, heater power is accompanied about 60% of other manufacturers. Electric furnace with constant temperature design, the entire regeneration process control at a constant heating temperature range, avoid the damage and loss of power of the electric furnace itself by frequent starting and stopping, effectively reducing the operating costs, extend equipment’s service life.
3. Vessel shell design, manufacture, testing, acceptance according to GB150 <Steel pressure vessels>, and the State Quality and Technical Supervision issued by the <Pressure Vessel Safety Technology supervision order>. Provide a full set of the required documentation of pressure vessels.
4. Original container and furnace design, ensuring smooth gas flow, bed stability, and elimination of damage to the container due to heating or cooling; absorption tower using 16 MnR material, resistant to fatigue, to run at low pressure, the container services for a more longer time.
5. Drying tower configured a filter can effectively remove the particulate component of natural gas , outlet with a fine filter, to prevent secondary pollution caused by adsorbent off, reducing the duplication process pipeline, reducing the pressure drop of equipment, saving the user’s investment cost.
6.This device is equipped with special cabinet, can accurately control the temperature when regenerating the device process, and in accordance with set procedures for movement control regeneration system; control panel set regenerate manual and automatic mode, and manually comes priority. When the regeneration is cycling, it can start or stop the heater, cooler at any time according to actual needs. Control procedures into the work order and interlocking relationships, to avoid human errors caused the losses. Based on the cooling fan, it has set up and down line running between temperature, to ensure the regeneration system does not over-temperature, regenerative heat exchanger does not ice block in winter, and the dew point temperature and dry gas can be observed.
7. For control system, except drying tower, switchover of regeneration tower need manual valve, all other actions will be automatically by the device. When the work tower is adsorbing, output dry gas; when regeneration tower is adsorbing, use a control valve to control the heating temperature of heater, when the regeneration has been finished, heater will automatically stop heating, start doing cold blow, when the temperature inside of the tower blow to the set temperature, the control cabinet will automatically stop all running power system, complete regeneration; all the control parameter can be remodify on controller, flexible and easy.
8. On drying tower device has set pressure gauge, temperature meter, visual display of work pressure and regeneration temperature and other working conditions; drying tower absorption tower has set discharge port with dedicated loading, easy replacement of filling.
9. Drying tower covered with high efficient insulation coating, good effect of insulation, beautiful looking.
10. Electric heating elements are using stainless steel material, thermal conductivity of large area, heating pipe with long service life,ensured that it’s working life will not less than 3 years.
11.Cooler adopts air-cooled efficient plate heat exchanger, it is 2500~4000 M
2
/M
3
higher than surface area. Compared with the same heat transfer area of the tube-fin heat exchanger, the volume was reduced 1.3 times, weight has reduced of more than 1 time.
12. Power generation location of device is reasonable, focus on external connection, produced according DIIBT4 explosion levels.
13.Galvanized pipe through the paint treatment, outdoor installation, long-term use does not fade.
The general technical parameters that can be meet by the deep dehydration device of natural gas
1.Model Low-pressure front, ultra low pressure front, large water content, super flow, high pressure postposition etc.
2. Equipment design working pressure range
3. Maximum handing ability6000Nm
3
/h(1.0mpa)
4. Working environment temperature -30 50°C
5 .Design temperature 345°C
6. Renewable heating temperature 210~230 °C
7. Product gas ordinary pressure dew point ≤-60°C
8.Maximum water content of raw material gas≤3500PPmv
9. Equipment overall pressure drop ≤0.03MPa
10.Adsorbent Molecular sieve
11.Regenerative method Built-in electric furnace, closed loop recycling
12.Cooling-down method Air-cooled or water cooled
13. Number of drying tower 2-4 tower
14.Class of explosive-proof dIIBT4
15. Level of protection IP64
16. Power requirements 380V±7%
17.Electric power around 40% smaller than other similar manufacturers
18.Control method Dedicated control cabinet, manual switching, automatic regeneration, manual discharge
19. Equipment noise ≤70 decibel
20.Measures to Ambient temperature is below 5 prevent ice block 5 °C heating band automatically
21.Fixed mode ship-shaped skid base, without to fix, easy to install
Descriptions of features and performance of equipment
1. Equipment imported the advanced technology from Italy and the United States, novel structure, easy operation, maintenance-free after commissioning. Using the 2 to 4 tower structure for the same equipment, single-stage adsorption, can handle high water content and large flows of feed gas, big quantity of adsorption, long cycle of adsorption, low depth of dehydration, can be operate continuously, continuous output of normal atmospheric dew point lower than -60°C purity, dry gas . Eliminate duplication investment of purchase multiple equipment.
2. The unique closed-loop recycling technology, built-in electric furnace, gas through the heater, flow of gas is slow, heating time is long, with high heating efficiency, heat evenly, small heat loss, to ensure full utilization of energy and greatly reduce the electric power and renewable energy, heater power is accompanied about 60% of other manufacturers. Electric furnace with constant temperature design, the entire regeneration process control at a constant heating temperature range, avoid the damage and loss of power of the electric furnace itself by frequent starting and stopping, effectively reducing the operating costs, extend equipment’s service life.
3. Vessel shell design, manufacture, testing, acceptance according to GB150 <Steel pressure vessels>, and the State Quality and Technical Supervision issued by the <Pressure Vessel Safety Technology supervision order>. Provide a full set of the required documentation of pressure vessels.
4. Original container and furnace design, ensuring smooth gas flow, bed stability, and elimination of damage to the container due to heating or cooling; absorption tower using 16 MnR material, resistant to fatigue, to run at low pressure, the container services for a more longer time.
5. Drying tower configured a filter can effectively remove the particulate component of natural gas , outlet with a fine filter, to prevent secondary pollution caused by adsorbent off, reducing the duplication process pipeline, reducing the pressure drop of equipment, saving the user’s investment cost.
6.This device is equipped with special cabinet, can accurately control the temperature when regenerating the device process, and in accordance with set procedures for movement control regeneration system; control panel set regenerate manual and automatic mode, and manually comes priority. When the regeneration is cycling, it can start or stop the heater, cooler at any time according to actual needs. Control procedures into the work order and interlocking relationships, to avoid human errors caused the losses. Based on the cooling fan, it has set up and down line running between temperature, to ensure the regeneration system does not over-temperature, regenerative heat exchanger does not ice block in winter, and the dew point temperature and dry gas can be observed.
7. For control system, except drying tower, switchover of regeneration tower need manual valve, all other actions will be automatically by the device. When the work tower is adsorbing, output dry gas; when regeneration tower is adsorbing, use a control valve to control the heating temperature of heater, when the regeneration has been finished, heater will automatically stop heating, start doing cold blow, when the temperature inside of the tower blow to the set temperature, the control cabinet will automatically stop all running power system, complete regeneration; all the control parameter can be remodify on controller, flexible and easy.
8. On drying tower device has set pressure gauge, temperature meter, visual display of work pressure and regeneration temperature and other working conditions; drying tower absorption tower has set discharge port with dedicated loading, easy replacement of filling.
9. Drying tower covered with high efficient insulation coating, good effect of insulation, beautiful looking.
10. Electric heating elements are using stainless steel material, thermal conductivity of large area, heating pipe with long service life,ensured that it’s working life will not less than 3 years.
11.Cooler adopts air-cooled efficient plate heat exchanger, it is 2500~4000 M
2
/M
3
higher than surface area. Compared with the same heat transfer area of the tube-fin heat exchanger, the volume was reduced 1.3 times, weight has reduced of more than 1 time.
12. Power generation location of device is reasonable, focus on external connection, produced according DIIBT4 explosion levels.
13.Galvanized pipe through the paint treatment, outdoor installation, long-term use does not fade.
Gas Dehydration Unit
Is especially used for deep dehydration of natural gas in CNG gas filling station
The general technical parameters that can be meet by the deep dehydration device of natural gas
1.Model Low-pressure front, ultra low pressure front, large water content, super flow, high pressure postposition etc.
2. Equipment design working pressure range
3. Maximum handing ability6000Nm
3
/h(1.0mpa)
4. Working environment temperature -30 50°C
5 .Design temperature 345°C
6. Renewable heating temperature 210~230 °C
7. Product gas ordinary pressure dew point ≤-60°C
8.Maximum water content of raw material gas≤3500PPmv
9. Equipment overall pressure drop ≤0.03MPa
10.Adsorbent Molecular sieve
11.Regenerative method Built-in electric furnace, closed loop recycling
12.Cooling-down method Air-cooled or water cooled
13. Number of drying tower 2-4 tower
14.Class of explosive-proof dIIBT4
15. Level of protection IP64
16. Power requirements 380V±7%
17.Electric power around 40% smaller than other similar manufacturers
18.Control method Dedicated control cabinet, manual switching, automatic regeneration, manual discharge
19. Equipment noise ≤70 decibel
20.Measures to Ambient temperature is below 5 prevent ice block 5 °C heating band automatically
21.Fixed mode ship-shaped skid base, without to fix, easy to install
Descriptions of features and performance of equipment
1. Equipment imported the advanced technology from Italy and the United States, novel structure, easy operation, maintenance-free after commissioning. Using the 2 to 4 tower structure for the same equipment, single-stage adsorption, can handle high water content and large flows of feed gas, big quantity of adsorption, long cycle of adsorption, low depth of dehydration, can be operate continuously, continuous output of normal atmospheric dew point lower than -60°C purity, dry gas . Eliminate duplication investment of purchase multiple equipment.
2. The unique closed-loop recycling technology, built-in electric furnace, gas through the heater, flow of gas is slow, heating time is long, with high heating efficiency, heat evenly, small heat loss, to ensure full utilization of energy and greatly reduce the electric power and renewable energy, heater power is accompanied about 60% of other manufacturers. Electric furnace with constant temperature design, the entire regeneration process control at a constant heating temperature range, avoid the damage and loss of power of the electric furnace itself by frequent starting and stopping, effectively reducing the operating costs, extend equipment’s service life.
3. Vessel shell design, manufacture, testing, acceptance according to GB150 <Steel pressure vessels>, and the State Quality and Technical Supervision issued by the <Pressure Vessel Safety Technology supervision order>. Provide a full set of the required documentation of pressure vessels.
4. Original container and furnace design, ensuring smooth gas flow, bed stability, and elimination of damage to the container due to heating or cooling; absorption tower using 16 MnR material, resistant to fatigue, to run at low pressure, the container services for a more longer time.
5. Drying tower configured a filter can effectively remove the particulate component of natural gas , outlet with a fine filter, to prevent secondary pollution caused by adsorbent off, reducing the duplication process pipeline, reducing the pressure drop of equipment, saving the user’s investment cost.
6.This device is equipped with special cabinet, can accurately control the temperature when regenerating the device process, and in accordance with set procedures for movement control regeneration system; control panel set regenerate manual and automatic mode, and manually comes priority. When the regeneration is cycling, it can start or stop the heater, cooler at any time according to actual needs. Control procedures into the work order and interlocking relationships, to avoid human errors caused the losses. Based on the cooling fan, it has set up and down line running between temperature, to ensure the regeneration system does not over-temperature, regenerative heat exchanger does not ice block in winter, and the dew point temperature and dry gas can be observed.
7. For control system, except drying tower, switchover of regeneration tower need manual valve, all other actions will be automatically by the device. When the work tower is adsorbing, output dry gas; when regeneration tower is adsorbing, use a control valve to control the heating temperature of heater, when the regeneration has been finished, heater will automatically stop heating, start doing cold blow, when the temperature inside of the tower blow to the set temperature, the control cabinet will automatically stop all running power system, complete regeneration; all the control parameter can be remodify on controller, flexible and easy.
8. On drying tower device has set pressure gauge, temperature meter, visual display of work pressure and regeneration temperature and other working conditions; drying tower absorption tower has set discharge port with dedicated loading, easy replacement of filling.
9. Drying tower covered with high efficient insulation coating, good effect of insulation, beautiful looking.
10. Electric heating elements are using stainless steel material, thermal conductivity of large area, heating pipe with long service life,ensured that it’s working life will not less than 3 years.
11.Cooler adopts air-cooled efficient plate heat exchanger, it is 2500~4000 M
2
/M
3
higher than surface area. Compared with the same heat transfer area of the tube-fin heat exchanger, the volume was reduced 1.3 times, weight has reduced of more than 1 time.
12. Power generation location of device is reasonable, focus on external connection, produced according DIIBT4 explosion levels.
13.Galvanized pipe through the paint treatment, outdoor installation, long-term use does not fade.
The general technical parameters that can be meet by the deep dehydration device of natural gas
1.Model Low-pressure front, ultra low pressure front, large water content, super flow, high pressure postposition etc.
2. Equipment design working pressure range
3. Maximum handing ability6000Nm
3
/h(1.0mpa)
4. Working environment temperature -30 50°C
5 .Design temperature 345°C
6. Renewable heating temperature 210~230 °C
7. Product gas ordinary pressure dew point ≤-60°C
8.Maximum water content of raw material gas≤3500PPmv
9. Equipment overall pressure drop ≤0.03MPa
10.Adsorbent Molecular sieve
11.Regenerative method Built-in electric furnace, closed loop recycling
12.Cooling-down method Air-cooled or water cooled
13. Number of drying tower 2-4 tower
14.Class of explosive-proof dIIBT4
15. Level of protection IP64
16. Power requirements 380V±7%
17.Electric power around 40% smaller than other similar manufacturers
18.Control method Dedicated control cabinet, manual switching, automatic regeneration, manual discharge
19. Equipment noise ≤70 decibel
20.Measures to Ambient temperature is below 5 prevent ice block 5 °C heating band automatically
21.Fixed mode ship-shaped skid base, without to fix, easy to install
Descriptions of features and performance of equipment
1. Equipment imported the advanced technology from Italy and the United States, novel structure, easy operation, maintenance-free after commissioning. Using the 2 to 4 tower structure for the same equipment, single-stage adsorption, can handle high water content and large flows of feed gas, big quantity of adsorption, long cycle of adsorption, low depth of dehydration, can be operate continuously, continuous output of normal atmospheric dew point lower than -60°C purity, dry gas . Eliminate duplication investment of purchase multiple equipment.
2. The unique closed-loop recycling technology, built-in electric furnace, gas through the heater, flow of gas is slow, heating time is long, with high heating efficiency, heat evenly, small heat loss, to ensure full utilization of energy and greatly reduce the electric power and renewable energy, heater power is accompanied about 60% of other manufacturers. Electric furnace with constant temperature design, the entire regeneration process control at a constant heating temperature range, avoid the damage and loss of power of the electric furnace itself by frequent starting and stopping, effectively reducing the operating costs, extend equipment’s service life.
3. Vessel shell design, manufacture, testing, acceptance according to GB150 <Steel pressure vessels>, and the State Quality and Technical Supervision issued by the <Pressure Vessel Safety Technology supervision order>. Provide a full set of the required documentation of pressure vessels.
4. Original container and furnace design, ensuring smooth gas flow, bed stability, and elimination of damage to the container due to heating or cooling; absorption tower using 16 MnR material, resistant to fatigue, to run at low pressure, the container services for a more longer time.
5. Drying tower configured a filter can effectively remove the particulate component of natural gas , outlet with a fine filter, to prevent secondary pollution caused by adsorbent off, reducing the duplication process pipeline, reducing the pressure drop of equipment, saving the user’s investment cost.
6.This device is equipped with special cabinet, can accurately control the temperature when regenerating the device process, and in accordance with set procedures for movement control regeneration system; control panel set regenerate manual and automatic mode, and manually comes priority. When the regeneration is cycling, it can start or stop the heater, cooler at any time according to actual needs. Control procedures into the work order and interlocking relationships, to avoid human errors caused the losses. Based on the cooling fan, it has set up and down line running between temperature, to ensure the regeneration system does not over-temperature, regenerative heat exchanger does not ice block in winter, and the dew point temperature and dry gas can be observed.
7. For control system, except drying tower, switchover of regeneration tower need manual valve, all other actions will be automatically by the device. When the work tower is adsorbing, output dry gas; when regeneration tower is adsorbing, use a control valve to control the heating temperature of heater, when the regeneration has been finished, heater will automatically stop heating, start doing cold blow, when the temperature inside of the tower blow to the set temperature, the control cabinet will automatically stop all running power system, complete regeneration; all the control parameter can be remodify on controller, flexible and easy.
8. On drying tower device has set pressure gauge, temperature meter, visual display of work pressure and regeneration temperature and other working conditions; drying tower absorption tower has set discharge port with dedicated loading, easy replacement of filling.
9. Drying tower covered with high efficient insulation coating, good effect of insulation, beautiful looking.
10. Electric heating elements are using stainless steel material, thermal conductivity of large area, heating pipe with long service life,ensured that it’s working life will not less than 3 years.
11.Cooler adopts air-cooled efficient plate heat exchanger, it is 2500~4000 M
2
/M
3
higher than surface area. Compared with the same heat transfer area of the tube-fin heat exchanger, the volume was reduced 1.3 times, weight has reduced of more than 1 time.
12. Power generation location of device is reasonable, focus on external connection, produced according DIIBT4 explosion levels.
13.Galvanized pipe through the paint treatment, outdoor installation, long-term use does not fade.
Gas Regulating metering System
Natural Gas Pressure regulating station
Gas metering station
SCADA system
Natural Gas Pressure Regulating Station,Gas pressure reducing & metering station
We design and manufacture the following plants:
* High Pressure City Gate and Offtake station;
* High-medium pressure Reducing & Metering Station;
* Low pressure Reducing & Metering Cabinet;
* Compressed natural gas reducing stations;
* Two-stage domestic reducing cabinet ;
* SCADA systems.
and following standard products:
* Turbine meter;
* Butterfly valve;
* Ball valve;
* Safety devices;
* Pressure regulator;
* Control valves;
* Other components.
Capacity of
completed
Natural Gas Pressure Regulating Station
Flow rate: 6000Sm3/h-160,000Sm3/h
Max Inlet pressure MPA:3.6
Min. Outlet pressure KPA:100
Application:
City gate station,long pipelines,power plant,oil field gas fuel power plant,gas turbine power plant etc.
Gas metering station
SCADA system
Natural Gas Pressure Regulating Station,Gas pressure reducing & metering station
We design and manufacture the following plants:
* High Pressure City Gate and Offtake station;
* High-medium pressure Reducing & Metering Station;
* Low pressure Reducing & Metering Cabinet;
* Compressed natural gas reducing stations;
* Two-stage domestic reducing cabinet ;
* SCADA systems.
and following standard products:
* Turbine meter;
* Butterfly valve;
* Ball valve;
* Safety devices;
* Pressure regulator;
* Control valves;
* Other components.
Capacity of
completed
Natural Gas Pressure Regulating Station
Flow rate: 6000Sm3/h-160,000Sm3/h
Max Inlet pressure MPA:3.6
Min. Outlet pressure KPA:100
Application:
City gate station,long pipelines,power plant,oil field gas fuel power plant,gas turbine power plant etc.
Gas Spherical Tanks
Customized model for Natural Gas Storage, for Pak industries keeping in consideration the current situation of Energy Shortage.
Specification
Wall thickness of Spherical shell plates
From 12mm to 62mm
Minimum Temperature
-50°C
Maximum single size
Width 3,650mm, length 12,580mm
Medium
Ethylene, Propylene, Oxygen, Nitrogen, Ammonia, Vinyl Chloride, natural gas, argon, Hydrogen, Liquefied Gas, LPG, LNG, Coal Gas, Water Gas, Compressed Air, Vacuum, Liquid Ammonia, Liquid Nitrogen, Refined Propylene, Butadiene, Isobutene, Propane, C3 Fraction, C4, C5, VCM, Clean Oil, Liquid Methyl Ether, Liquid Carbon Dioxide, Pulverized Coal, Light Hydrocarbon, methyl chloride, etc.
Cubage Dimension
From 50m³ to 10000m³
Note:
OEM service, provide all kinds of specifications and models of spherical tank according to customers requirements
Specification
Wall thickness of Spherical shell plates
From 12mm to 62mm
Minimum Temperature
-50°C
Maximum single size
Width 3,650mm, length 12,580mm
Medium
Ethylene, Propylene, Oxygen, Nitrogen, Ammonia, Vinyl Chloride, natural gas, argon, Hydrogen, Liquefied Gas, LPG, LNG, Coal Gas, Water Gas, Compressed Air, Vacuum, Liquid Ammonia, Liquid Nitrogen, Refined Propylene, Butadiene, Isobutene, Propane, C3 Fraction, C4, C5, VCM, Clean Oil, Liquid Methyl Ether, Liquid Carbon Dioxide, Pulverized Coal, Light Hydrocarbon, methyl chloride, etc.
Cubage Dimension
From 50m³ to 10000m³
Note:
OEM service, provide all kinds of specifications and models of spherical tank according to customers requirements
Gas Storage system
Customized model for Natural Gas Storage, for Pak industries keeping in consideration the current situation of Energy Shortage.
Sichuan South Gas Compressors Co. Ltd is a leading manufacturer of CNG, and Industrial Compressors in Sichuan Province of P. R of China.
We are the real Chinese manufacturer, with primary sources, we are not trade agent.
Sichuan South Gas Compressors Co., Ltd Pakistan Branch is an established Branch with SECP, having
Tax Number.
We have set up storehouses in Islamabad, Lahore and Karachi and also we have arranged several resident Chinese engineers in
Pakistan to provide customers technical support and good after-sales service.
As per the current situation of load shedding of gas to industrial area, because of gas shortage, Sichaun South Gas Compressors has designed a model plan, for the storage of gas for industrial plant. As per Oil and Gas Regulatory Authority the industries are allowed to consume a specific maximum number of units in a month. And because of load shedding, the less number of units are consumed, because of which they are allowed to store the gas.
The model helps, to store the gas during gas availability days, and consume the stored gas during load shedding period.
The model almost works like a CNG station. It includes Inlet and outlet buffer tanks, Cooling Tower, Compressors sets, Storage Cylinder. Gas is first stored in Inlet buffer tank via low pressure gas lines, after that it is compressed and stored in storage cylinders via high pressure lines. From Cylinders to outlet buffer the presser is reduced by manual vacuumed system. Final to run the generators, gas is supplied to generators by further reducing the pressure, to 1 bar.
Our Model is approved by the concerned authorities, and OGRA. Our first project is going to be completed, and the machinery will be installed in April 2011.
Sichuan South Gas Compressors Co. Ltd is a leading manufacturer of CNG, and Industrial Compressors in Sichuan Province of P. R of China.
We are the real Chinese manufacturer, with primary sources, we are not trade agent.
Sichuan South Gas Compressors Co., Ltd Pakistan Branch is an established Branch with SECP, having
Tax Number.
We have set up storehouses in Islamabad, Lahore and Karachi and also we have arranged several resident Chinese engineers in
Pakistan to provide customers technical support and good after-sales service.
As per the current situation of load shedding of gas to industrial area, because of gas shortage, Sichaun South Gas Compressors has designed a model plan, for the storage of gas for industrial plant. As per Oil and Gas Regulatory Authority the industries are allowed to consume a specific maximum number of units in a month. And because of load shedding, the less number of units are consumed, because of which they are allowed to store the gas.
The model helps, to store the gas during gas availability days, and consume the stored gas during load shedding period.
The model almost works like a CNG station. It includes Inlet and outlet buffer tanks, Cooling Tower, Compressors sets, Storage Cylinder. Gas is first stored in Inlet buffer tank via low pressure gas lines, after that it is compressed and stored in storage cylinders via high pressure lines. From Cylinders to outlet buffer the presser is reduced by manual vacuumed system. Final to run the generators, gas is supplied to generators by further reducing the pressure, to 1 bar.
Our Model is approved by the concerned authorities, and OGRA. Our first project is going to be completed, and the machinery will be installed in April 2011.
Gas metering station
Natural Gas Pressure regulating station
Gas metering station
SCADA system
Natural Gas Pressure Regulating Station,Gas pressure reducing & metering station
We design and manufacture the following plants:
* High Pressure City Gate and Offtake station;
* High-medium pressure Reducing & Metering Station;
* Low pressure Reducing & Metering Cabinet;
* Compressed natural gas reducing stations;
* Two-stage domestic reducing cabinet ;
* SCADA systems.
and following standard products:
* Turbine meter;
* Butterfly valve;
* Ball valve;
* Safety devices;
* Pressure regulator;
* Control valves;
* Other components.
Capacity of
completed
Natural Gas Pressure Regulating Station
Flow rate: 6000Sm3/h-160,000Sm3/h
Max Inlet pressure MPA:3.6
Min. Outlet pressure KPA:100
Application:
City gate station,long pipelines,power plant,oil field gas fuel power plant,gas turbine power plant etc.
Gas metering station
SCADA system
Natural Gas Pressure Regulating Station,Gas pressure reducing & metering station
We design and manufacture the following plants:
* High Pressure City Gate and Offtake station;
* High-medium pressure Reducing & Metering Station;
* Low pressure Reducing & Metering Cabinet;
* Compressed natural gas reducing stations;
* Two-stage domestic reducing cabinet ;
* SCADA systems.
and following standard products:
* Turbine meter;
* Butterfly valve;
* Ball valve;
* Safety devices;
* Pressure regulator;
* Control valves;
* Other components.
Capacity of
completed
Natural Gas Pressure Regulating Station
Flow rate: 6000Sm3/h-160,000Sm3/h
Max Inlet pressure MPA:3.6
Min. Outlet pressure KPA:100
Application:
City gate station,long pipelines,power plant,oil field gas fuel power plant,gas turbine power plant etc.
Gas-Oil Separating Filter Element of CompAir Air Compressor
Gas-Oil Separating Filter Element
of CompAir Air Compressor
We can provid sample for test!
ISO9001-2008
Best Price!
Model
Flowing Capacity
M3/min/Mpa
Original Oil Separating Filter Element Code
Diameter of Filter Element mm
Height of Filter Element
mm
Product Code
707 PUAS
1.25/0.7
59177
70
205
32 215 70 204
715PUAS
2.25/0.8
70539
70
205
32 215 70 205
822PUAS
3.57/0.8
59180
70
255
32 215 70 255
830PUAS
4.56/0.8
837PUAS
5.64/0.8
RALLYE
070-112
7.1-12/7.5
10525274
302
AA1355
6050N
6.3/0.75
98262/194
200
250
32 211 17 250
6075N
10/0.7
98262/162
274
230
32 211 22 230
6100N
13.5/0.7
98262/26
348
450
32 211 30 451
6150N
20/0.7
98262/78
355
600
32 211 30 601
Sirius250
42.7/0.7
11427474
440
490
32 211 39 490
Gas-Oil Separating Filter Element
of CompAir Air Compressor
We can provid sample for test!
ISO9001-2008
Best Price!
of CompAir Air Compressor
We can provid sample for test!
ISO9001-2008
Best Price!
Model
Flowing Capacity
M3/min/Mpa
Original Oil Separating Filter Element Code
Diameter of Filter Element mm
Height of Filter Element
mm
Product Code
707 PUAS
1.25/0.7
59177
70
205
32 215 70 204
715PUAS
2.25/0.8
70539
70
205
32 215 70 205
822PUAS
3.57/0.8
59180
70
255
32 215 70 255
830PUAS
4.56/0.8
837PUAS
5.64/0.8
RALLYE
070-112
7.1-12/7.5
10525274
302
AA1355
6050N
6.3/0.75
98262/194
200
250
32 211 17 250
6075N
10/0.7
98262/162
274
230
32 211 22 230
6100N
13.5/0.7
98262/26
348
450
32 211 30 451
6150N
20/0.7
98262/78
355
600
32 211 30 601
Sirius250
42.7/0.7
11427474
440
490
32 211 39 490
Gas-Oil Separating Filter Element
of CompAir Air Compressor
We can provid sample for test!
ISO9001-2008
Best Price!
75kw natural gas generator set
75kw natural gas generator set
1. Power Saving
2. Environment Protection
3. Reasonable price and High quality.
75kw natural gas generator set
Model of Generating Sets
75GF-T
Model of engine
H6135DT
Rated power KW
75
Rated speed r/min.
1500r/min
Rated voltage V
400
Rated current A
135
Rated frequency Hz
50
Rated power factor
0.8 Lagging
Supply method
3 phases 4 lines
Excitation method
Brushless
Starting method
Electric motor starters
Cooling method
Closed type water cooling
Bore mm
135
Speed modulate method
Electronic control
Net weight kg
2410
Overall dimension L×B×H(mm)
2750x1010x1480mm
(Reference size only)
1. Power Saving
2. Environment Protection
3. Reasonable price and High quality.
75kw natural gas generator set
Model of Generating Sets
75GF-T
Model of engine
H6135DT
Rated power KW
75
Rated speed r/min.
1500r/min
Rated voltage V
400
Rated current A
135
Rated frequency Hz
50
Rated power factor
0.8 Lagging
Supply method
3 phases 4 lines
Excitation method
Brushless
Starting method
Electric motor starters
Cooling method
Closed type water cooling
Bore mm
135
Speed modulate method
Electronic control
Net weight kg
2410
Overall dimension L×B×H(mm)
2750x1010x1480mm
(Reference size only)
Heating treatment furnace
Metal heating furnace , Save energy, safe, High degree of automatic, Enviromental protective, etc.
Various gas furnace for industrial use, Technology imported from Germany Huoke De, used for heating treatment, etc.
Various gas to be used for the combustion
Save energy, Safe, High Degree automatic, Enviromental protection, etc.
Various gas furnace for industrial use, Technology imported from Germany Huoke De, used for heating treatment, etc.
Various gas to be used for the combustion
Save energy, Safe, High Degree automatic, Enviromental protection, etc.
High Pressure City Gate and Offtake station
Natural Gas Pressure regulating station
Gas metering station
SCADA system
Natural Gas Pressure Regulating Station,Gas pressure reducing & metering station
We design and manufacture the following plants:
* High Pressure City Gate and Offtake station;
* High-medium pressure Reducing & Metering Station;
* Low pressure Reducing & Metering Cabinet;
* Compressed natural gas reducing stations;
* Two-stage domestic reducing cabinet ;
* SCADA systems.
and following standard products:
* Turbine meter;
* Butterfly valve;
* Ball valve;
* Safety devices;
* Pressure regulator;
* Control valves;
* Other components.
Capacity of
completed
Natural Gas Pressure Regulating Station
Flow rate: 6000Sm3/h-160,000Sm3/h
Max Inlet pressure MPA:3.6
Min. Outlet pressure KPA:100
Application:
City gate station,long pipelines,power plant,oil field gas fuel power plant,gas turbine power plant etc.
Gas metering station
SCADA system
Natural Gas Pressure Regulating Station,Gas pressure reducing & metering station
We design and manufacture the following plants:
* High Pressure City Gate and Offtake station;
* High-medium pressure Reducing & Metering Station;
* Low pressure Reducing & Metering Cabinet;
* Compressed natural gas reducing stations;
* Two-stage domestic reducing cabinet ;
* SCADA systems.
and following standard products:
* Turbine meter;
* Butterfly valve;
* Ball valve;
* Safety devices;
* Pressure regulator;
* Control valves;
* Other components.
Capacity of
completed
Natural Gas Pressure Regulating Station
Flow rate: 6000Sm3/h-160,000Sm3/h
Max Inlet pressure MPA:3.6
Min. Outlet pressure KPA:100
Application:
City gate station,long pipelines,power plant,oil field gas fuel power plant,gas turbine power plant etc.
High adsorbent and no-pollution for Natural gas
1.Performance:Best adsorbent and Competitive price
2. Environmental protection
3. Specifications:according to customer request
TOP QUALITY LOW PRICE, NICE MOLECULAR SIEVE!
Shanghai desikenshi Molecular sieve CO.,Ltd
Molecular Formula: 0.6
7
K
2
O
·
0.33Na
2
O
·
Al
2
O
3
·
2SiO
2
·
4.5H
2
O
Melocular sieves 3A
Melocular sieve 3A is an alkali metal alumino silicate, it is the potassium form of the type A crystal structure.
Molecular sieve 3A has an effective pore opening of about 4 angstroms, it adsorbs molecular with effective diameters smaller than approximately 3 angstroms.But excludes molecules such as unsaturated hydrocarbons.
property
uint
bead
pellet
note
Diameter
Mm
1.6-2.5
3-5
1/16
1/8
StaticH2O adsorption
%wt
≥21.5
≥21.5
≥21.5
≥21.5
RH10%,25°C
Bulk density
g/ml
≥0.70
≥0.70
≥0.65
≥0.65
settledc
Loss on attrition
%wt
≤0.10
≤0.10
≤0.20
≤0.20
Loss on ignition
%wt
≤1.50
≤1.50
≤1.50
≤1.50
575°C,1H
Crush strength
N
≥30
≥80
≥40
≥70
Partical ratio
%
≥97
≥99
Recommended application:
·drying of unsaturated hydrocarbons(e.g.ethylene,butadien)
·cracked gas drying.
·drying of natural gas,if COS minimization is essential, or a minimum co-adsorption of hydrocarbons is required..
·drying of highly polar compounds,such as methanol and ethanol.
·static,(non-regenerative)dehydration of insulating glass uints,whether air filled or gas-filled.
·dehydration of refrigerant.
Packing:
·55 gallon air-tight iron drum,and each drum has inner PE bag.
·25 kg/carton,and each carton has inner PE bag.
·other packing according to your requirement.
Instruction:
prevent molecular sieve from exposing directly to the air.
Waring:
molecular sieve adsorption activity is an exothermic reaction,any contact to human body is dangerous.
2. Environmental protection
3. Specifications:according to customer request
TOP QUALITY LOW PRICE, NICE MOLECULAR SIEVE!
Shanghai desikenshi Molecular sieve CO.,Ltd
Molecular Formula: 0.6
7
K
2
O
·
0.33Na
2
O
·
Al
2
O
3
·
2SiO
2
·
4.5H
2
O
Melocular sieves 3A
Melocular sieve 3A is an alkali metal alumino silicate, it is the potassium form of the type A crystal structure.
Molecular sieve 3A has an effective pore opening of about 4 angstroms, it adsorbs molecular with effective diameters smaller than approximately 3 angstroms.But excludes molecules such as unsaturated hydrocarbons.
property
uint
bead
pellet
note
Diameter
Mm
1.6-2.5
3-5
1/16
1/8
StaticH2O adsorption
%wt
≥21.5
≥21.5
≥21.5
≥21.5
RH10%,25°C
Bulk density
g/ml
≥0.70
≥0.70
≥0.65
≥0.65
settledc
Loss on attrition
%wt
≤0.10
≤0.10
≤0.20
≤0.20
Loss on ignition
%wt
≤1.50
≤1.50
≤1.50
≤1.50
575°C,1H
Crush strength
N
≥30
≥80
≥40
≥70
Partical ratio
%
≥97
≥99
Recommended application:
·drying of unsaturated hydrocarbons(e.g.ethylene,butadien)
·cracked gas drying.
·drying of natural gas,if COS minimization is essential, or a minimum co-adsorption of hydrocarbons is required..
·drying of highly polar compounds,such as methanol and ethanol.
·static,(non-regenerative)dehydration of insulating glass uints,whether air filled or gas-filled.
·dehydration of refrigerant.
Packing:
·55 gallon air-tight iron drum,and each drum has inner PE bag.
·25 kg/carton,and each carton has inner PE bag.
·other packing according to your requirement.
Instruction:
prevent molecular sieve from exposing directly to the air.
Waring:
molecular sieve adsorption activity is an exothermic reaction,any contact to human body is dangerous.
High-medium pressure Reducing & Metering Station
Natural Gas Pressure regulating station
Gas metering station
SCADA system
Natural Gas Pressure Regulating Station,Gas pressure reducing & metering station
We design and manufacture the following plants:
* High Pressure City Gate and Offtake station;
* High-medium pressure Reducing & Metering Station;
* Low pressure Reducing & Metering Cabinet;
* Compressed natural gas reducing stations;
* Two-stage domestic reducing cabinet ;
* SCADA systems.
and following standard products:
* Turbine meter;
* Butterfly valve;
* Ball valve;
* Safety devices;
* Pressure regulator;
* Control valves;
* Other components.
Capacity of
completed
Natural Gas Pressure Regulating Station
Flow rate: 6000Sm3/h-160,000Sm3/h
Max Inlet pressure MPA:3.6
Min. Outlet pressure KPA:100
Application:
City gate station,long pipelines,power plant,oil field gas fuel power plant,gas turbine power plant etc.
Gas metering station
SCADA system
Natural Gas Pressure Regulating Station,Gas pressure reducing & metering station
We design and manufacture the following plants:
* High Pressure City Gate and Offtake station;
* High-medium pressure Reducing & Metering Station;
* Low pressure Reducing & Metering Cabinet;
* Compressed natural gas reducing stations;
* Two-stage domestic reducing cabinet ;
* SCADA systems.
and following standard products:
* Turbine meter;
* Butterfly valve;
* Ball valve;
* Safety devices;
* Pressure regulator;
* Control valves;
* Other components.
Capacity of
completed
Natural Gas Pressure Regulating Station
Flow rate: 6000Sm3/h-160,000Sm3/h
Max Inlet pressure MPA:3.6
Min. Outlet pressure KPA:100
Application:
City gate station,long pipelines,power plant,oil field gas fuel power plant,gas turbine power plant etc.
Home cng fueling compressor 6 Cubic meter
6 Cubic meterCNG home fueling station with NGV-2 and breakaway system
SYP clean energy cng home fueling station with the new update in according to CSA/UL standard. With 1000 hours durability life testing . SYP give customer the 4000 Hours warrnaty for long term running running process for our customer
All SYP cng home fueling station we offer to customer is complet set : . including :
CNG compresosr unit, safe manage control panel. high presusre fueling hose and autoblow down system
All the design and life test is base on
CSA/UL/CE standard . NFPA 52 /70/UL519 standard
All the insall and warranty process :
will be handle by our authorized distributor
Average discharge volume is from :
0.7 GGGE to 1.6 GGE /Hours
Averagne power consume
2 Kw
Inlet presure base on
0.25 PSI to 45 PSI
Work presusre
3000 PSI
Auto blow down system including
: 3600 PSI auto blow down valve
Fuel Nozzle :
NGV-1 approve by ANGI , Work pressure 3000 PSI
Control Systme :
Automaitc working sytem with Safe management PLC unit
Easy operate system :
Touch screen for easy operate
Work Power
220V 1 phase for redidentail garage install / 10 A
We product the best cng home fueling statoin in according to legal way with CSA/UL approve . Please contact with us or our distributor for the new design order . please ensure the distribuotr is with SYP authorized
CNG home fueling station deal with hazard gas during high pressure. Please ensure the install process is meet UL519/NFPA52 for residential garage or Outdoor in according to Federal law.
SYP distributor would like support you install the station with legal way. Please reference our authorized agency from our website
www.sypcleanenergy.com
SYP clean energy cng home fueling station with the new update in according to CSA/UL standard. With 1000 hours durability life testing . SYP give customer the 4000 Hours warrnaty for long term running running process for our customer
All SYP cng home fueling station we offer to customer is complet set : . including :
CNG compresosr unit, safe manage control panel. high presusre fueling hose and autoblow down system
All the design and life test is base on
CSA/UL/CE standard . NFPA 52 /70/UL519 standard
All the insall and warranty process :
will be handle by our authorized distributor
Average discharge volume is from :
0.7 GGGE to 1.6 GGE /Hours
Averagne power consume
2 Kw
Inlet presure base on
0.25 PSI to 45 PSI
Work presusre
3000 PSI
Auto blow down system including
: 3600 PSI auto blow down valve
Fuel Nozzle :
NGV-1 approve by ANGI , Work pressure 3000 PSI
Control Systme :
Automaitc working sytem with Safe management PLC unit
Easy operate system :
Touch screen for easy operate
Work Power
220V 1 phase for redidentail garage install / 10 A
We product the best cng home fueling statoin in according to legal way with CSA/UL approve . Please contact with us or our distributor for the new design order . please ensure the distribuotr is with SYP authorized
CNG home fueling station deal with hazard gas during high pressure. Please ensure the install process is meet UL519/NFPA52 for residential garage or Outdoor in according to Federal law.
SYP distributor would like support you install the station with legal way. Please reference our authorized agency from our website
www.sypcleanenergy.com
Hydrogen Spherical Tanks
Customized model for Natural Gas Storage, for Pak industries keeping in consideration the current situation of Energy Shortage.
Specification
Wall thickness of Spherical shell plates
From 12mm to 62mm
Minimum Temperature
-50°C
Maximum single size
Width 3,650mm, length 12,580mm
Medium
Ethylene, Propylene, Oxygen, Nitrogen, Ammonia, Vinyl Chloride, natural gas, argon, Hydrogen, Liquefied Gas, LPG, LNG, Coal Gas, Water Gas, Compressed Air, Vacuum, Liquid Ammonia, Liquid Nitrogen, Refined Propylene, Butadiene, Isobutene, Propane, C3 Fraction, C4, C5, VCM, Clean Oil, Liquid Methyl Ether, Liquid Carbon Dioxide, Pulverized Coal, Light Hydrocarbon, methyl chloride, etc.
Cubage Dimension
From 50m³ to 10000m³
Note:
OEM service, provide all kinds of specifications and models of spherical tank according to customers requirements
Specification
Wall thickness of Spherical shell plates
From 12mm to 62mm
Minimum Temperature
-50°C
Maximum single size
Width 3,650mm, length 12,580mm
Medium
Ethylene, Propylene, Oxygen, Nitrogen, Ammonia, Vinyl Chloride, natural gas, argon, Hydrogen, Liquefied Gas, LPG, LNG, Coal Gas, Water Gas, Compressed Air, Vacuum, Liquid Ammonia, Liquid Nitrogen, Refined Propylene, Butadiene, Isobutene, Propane, C3 Fraction, C4, C5, VCM, Clean Oil, Liquid Methyl Ether, Liquid Carbon Dioxide, Pulverized Coal, Light Hydrocarbon, methyl chloride, etc.
Cubage Dimension
From 50m³ to 10000m³
Note:
OEM service, provide all kinds of specifications and models of spherical tank according to customers requirements
L type CNG compressor
L type CNG compressor with 700NM3/H discharge for daughther CNG station
CNG is clean energy , as it is competive price and perfect power performance , it will be the new energy in coming future
Shenghe performance take integratioin design with CAD program in CNG station install. We offer customer the coordinatd-process service in different step from CNG station construction styple. Cng station equipment manufacture , delivery, install ,training each step is managed by the progogram it all we offer cusomter the quickly delivery
L type CNG compressore paremter
1)L-3.2/3-250 (skid)
2)Suction pressure: 3bar
3)Discharge pressure: 250bar
4)Gas supply: 720Nm
3
/h
5)Including: mainframe, proof-explosive motor 160kW, 380V, 50Hz, cooler between steps, separator, security valves, blow down valve, tools, technical documentary, .
CNG is clean energy , as it is competive price and perfect power performance , it will be the new energy in coming future
Shenghe performance take integratioin design with CAD program in CNG station install. We offer customer the coordinatd-process service in different step from CNG station construction styple. Cng station equipment manufacture , delivery, install ,training each step is managed by the progogram it all we offer cusomter the quickly delivery
L type CNG compressore paremter
1)L-3.2/3-250 (skid)
2)Suction pressure: 3bar
3)Discharge pressure: 250bar
4)Gas supply: 720Nm
3
/h
5)Including: mainframe, proof-explosive motor 160kW, 380V, 50Hz, cooler between steps, separator, security valves, blow down valve, tools, technical documentary, .
LNG CNG
lng-liquefied natural gas technology
liquefied natural gas technology
take natural gas as raw materials to produce liquefied natural gas
take coal bed methane as raw materials to produce liquefied natural gas
comprehensive utilization of coke oven gas as raw materials to produce LNG
take biogas as raw materials to produce LNG
comprehensive utilization of tail gas with methane as raw materials to produce lng
take coal mine gas as raw materials to produce LNG
liquefied natural gas technology
take natural gas as raw materials to produce liquefied natural gas
take coal bed methane as raw materials to produce liquefied natural gas
comprehensive utilization of coke oven gas as raw materials to produce LNG
take biogas as raw materials to produce LNG
comprehensive utilization of tail gas with methane as raw materials to produce lng
take coal mine gas as raw materials to produce LNG
LNG dispenser
1.latest style
2.excellent quality, competitive price
3.various popular models to choose
4.customer design
Main technical specification of the LNG dispenser
Level of explosion protection: ibdme II AT4
Working media: LNG
Range of flow: 1~113L/min
Measuring accuracy: ±0.5%
Max working pressure: 1.6Mpa
Working power: 220V±15% 50Hz±1Hz
Power: ≤200W
Ambient temp.: -30~+50°C
Measuring Range per Occurrence: 9999.99 m
3
Measuring Range Accumulated: 99999999.99 m
3
Weight: 250kg
Packaging Dimension: 1220×750×2030
2.excellent quality, competitive price
3.various popular models to choose
4.customer design
Main technical specification of the LNG dispenser
Level of explosion protection: ibdme II AT4
Working media: LNG
Range of flow: 1~113L/min
Measuring accuracy: ±0.5%
Max working pressure: 1.6Mpa
Working power: 220V±15% 50Hz±1Hz
Power: ≤200W
Ambient temp.: -30~+50°C
Measuring Range per Occurrence: 9999.99 m
3
Measuring Range Accumulated: 99999999.99 m
3
Weight: 250kg
Packaging Dimension: 1220×750×2030
8 Cylinder EFI enigne use sequential Gas Injection System -LPG conversion kit
5 generation sequential Gas Injection System(GIS),LPG /LPG conversion kit multipoint system for 8 cylinders car
SYP CNG/LPG sequential injection conversion kit for gasoline EFI (Electronic Fuel injection engine) is fourth generation conversion kit . the kit support max 6000CC discharge various EFI gasoline engine
Conversion kit take self-feeding reducer .The system integrate ECU (Electronic control Unit) .take the Micro-computer muti-point injection technical technology. The ECU is high level sensitive micro-computer . with the execute in the Gas temperature , Pressure sensor and Map Senor. Gas ECU will work with petrol ECU to automatic manage the EFI engine parameter . Sequential injection ECU will real-time and continue monitor and manage the gas injection time in according to different engine condition
Emulator and the interface be integrate with ECU . and the high frequency gas injector .the design allow the control precision up to 1ms for the EFI engine
CNG/LPG Sequential injection system made from follow component
CNG reducer 3 stage pressure reducer)/ LPG reucer(3 stage pressure reducer
Gas ECU kit for 4 cylinder engine
Gas ECU for 6 and 8 cylinder engine
Thee position Switcher
Sequential injection injector for 4 cylinder and 6,8 cylinder eginee
CNG/LPG feed nozzle
Map Senor , Gas temperature Sensor , Water temperature sensor ,Pressure sensor
HP pressure tube(LPG have equip brass tube and muti-valve )
Work pressure :20Mpa for CNG engine, 2.5Mpa for LPG engine
Work power 12V A/C
Install accessories
SYP CNG/LPG sequential injection conversion kit for gasoline EFI (Electronic Fuel injection engine) is fourth generation conversion kit . the kit support max 6000CC discharge various EFI gasoline engine
Conversion kit take self-feeding reducer .The system integrate ECU (Electronic control Unit) .take the Micro-computer muti-point injection technical technology. The ECU is high level sensitive micro-computer . with the execute in the Gas temperature , Pressure sensor and Map Senor. Gas ECU will work with petrol ECU to automatic manage the EFI engine parameter . Sequential injection ECU will real-time and continue monitor and manage the gas injection time in according to different engine condition
Emulator and the interface be integrate with ECU . and the high frequency gas injector .the design allow the control precision up to 1ms for the EFI engine
CNG/LPG Sequential injection system made from follow component
CNG reducer 3 stage pressure reducer)/ LPG reucer(3 stage pressure reducer
Gas ECU kit for 4 cylinder engine
Gas ECU for 6 and 8 cylinder engine
Thee position Switcher
Sequential injection injector for 4 cylinder and 6,8 cylinder eginee
CNG/LPG feed nozzle
Map Senor , Gas temperature Sensor , Water temperature sensor ,Pressure sensor
HP pressure tube(LPG have equip brass tube and muti-valve )
Work pressure :20Mpa for CNG engine, 2.5Mpa for LPG engine
Work power 12V A/C
Install accessories
LNG-LCNG station equipment
LNG-LCNG station equipment
Skid-mounted LNG/LCNG/CNG combination filling station, which is adaptability, can refuel cars .
Ski
LNG-LCNG station equipment
Skid-mounted LNG/LCNG/CNG combination filling station, which is adaptability, can refuel cars .by LNG in different phase state,Skid-mounted LNG/LCNG/CNG combination filling station, which is adaptability, can refuel cars .by LNG in different phase state .
Skid-mounted LNG/LCNG/CNG combination filling station, which is adaptability, can refuel cars .
Ski
LNG-LCNG station equipment
Skid-mounted LNG/LCNG/CNG combination filling station, which is adaptability, can refuel cars .by LNG in different phase state,Skid-mounted LNG/LCNG/CNG combination filling station, which is adaptability, can refuel cars .by LNG in different phase state .
LPG Spherical Tanks
Customized model for Natural Gas Storage, for Pak industries keeping in consideration the current situation of Energy Shortage.
Specification
Wall thickness of Spherical shell plates
From 12mm to 62mm
Minimum Temperature
-50°C
Maximum single size
Width 3,650mm, length 12,580mm
Medium
Ethylene, Propylene, Oxygen, Nitrogen, Ammonia, Vinyl Chloride, natural gas, argon, Hydrogen, Liquefied Gas, LPG, LNG, Coal Gas, Water Gas, Compressed Air, Vacuum, Liquid Ammonia, Liquid Nitrogen, Refined Propylene, Butadiene, Isobutene, Propane, C3 Fraction, C4, C5, VCM, Clean Oil, Liquid Methyl Ether, Liquid Carbon Dioxide, Pulverized Coal, Light Hydrocarbon, methyl chloride, etc.
Cubage Dimension
From 50m³ to 10000m³
Note:
OEM service, provide all kinds of specifications and models of spherical tank according to customers requirements
Specification
Wall thickness of Spherical shell plates
From 12mm to 62mm
Minimum Temperature
-50°C
Maximum single size
Width 3,650mm, length 12,580mm
Medium
Ethylene, Propylene, Oxygen, Nitrogen, Ammonia, Vinyl Chloride, natural gas, argon, Hydrogen, Liquefied Gas, LPG, LNG, Coal Gas, Water Gas, Compressed Air, Vacuum, Liquid Ammonia, Liquid Nitrogen, Refined Propylene, Butadiene, Isobutene, Propane, C3 Fraction, C4, C5, VCM, Clean Oil, Liquid Methyl Ether, Liquid Carbon Dioxide, Pulverized Coal, Light Hydrocarbon, methyl chloride, etc.
Cubage Dimension
From 50m³ to 10000m³
Note:
OEM service, provide all kinds of specifications and models of spherical tank according to customers requirements
Tuesday, October 25, 2011
LPG conversion kit
LPG conversion kit multipoint system for 4 cylinders car, ECE approve
LPG conversion kit multipoint system for 4 cylinders car
LPG conversion kit multipoint system for 4 cylinders car
LPG conversion kit
LPG conversion kit multipoint system for 4 cylinders car, ECE approve
LPG conversion kit multipoint system for 4 cylinders car
LPG conversion kit multipoint system for 4 cylinders car
LPG sequention injection kit for 4 cylinder EFI engine
LPG sequention injection kit speciclly design for compact small 4 cylinder EFI car .OBD compatibility
LPG sequention injection kit speciclly design for compact small EFI car . SYP give generation LPG/CNG conversion kit is self-carburetor surport 3,4,5,6,8 cylinder
CNG/LPG sequential injection conversion kit for gasoline EFI (Electronic Fuel injection engine) is fourth generation conversion kit . the kit support max 6000CC discharge various EFI gasoline engine
Conversion kit take self-feeding reducer .The system integrate ECU (Electronic control Unit) .take the Micro-computer muti-point injection technical technology. The ECU is high level sensitive micro-computer . with the execute in the Gas temperature , Pressure sensor and Map Senor. Gas ECU will work with petrol ECU to automatic manage the EFI engine parameter . Sequential injection ECU will real-time and continue monitor and manage the gas injection time in according to different engine condition
Emulator and the interface be integrate with ECU . and the high frequency gas injector .the design allow the control precision up to 1ms for the EFI engine
CNG/LPG Sequential injection system made from follow component
CNG reducer 3 stage pressure reducer)/ LPG reucer(3 stage pressure reducer
Gas ECU kit for 4 cylinder engine
Gas ECU for 6 and 8 cylinder engine
Thee position Switcher
Sequential injection injector for 4 cylinder and 6,8 cylinder eginee
CNG/LPG feed nozzle
Map Senor , Gas temperature Sensor , Water temperature sensor ,Pressure sensor
HP pressure tube(LPG have equip brass tube and muti-valve )
Work pressure :20Mpa for CNG engine, 2.5Mpa for LPG engine
Work power 12V A/C
Install accessories
LPG sequention injection kit speciclly design for compact small EFI car . SYP give generation LPG/CNG conversion kit is self-carburetor surport 3,4,5,6,8 cylinder
CNG/LPG sequential injection conversion kit for gasoline EFI (Electronic Fuel injection engine) is fourth generation conversion kit . the kit support max 6000CC discharge various EFI gasoline engine
Conversion kit take self-feeding reducer .The system integrate ECU (Electronic control Unit) .take the Micro-computer muti-point injection technical technology. The ECU is high level sensitive micro-computer . with the execute in the Gas temperature , Pressure sensor and Map Senor. Gas ECU will work with petrol ECU to automatic manage the EFI engine parameter . Sequential injection ECU will real-time and continue monitor and manage the gas injection time in according to different engine condition
Emulator and the interface be integrate with ECU . and the high frequency gas injector .the design allow the control precision up to 1ms for the EFI engine
CNG/LPG Sequential injection system made from follow component
CNG reducer 3 stage pressure reducer)/ LPG reucer(3 stage pressure reducer
Gas ECU kit for 4 cylinder engine
Gas ECU for 6 and 8 cylinder engine
Thee position Switcher
Sequential injection injector for 4 cylinder and 6,8 cylinder eginee
CNG/LPG feed nozzle
Map Senor , Gas temperature Sensor , Water temperature sensor ,Pressure sensor
HP pressure tube(LPG have equip brass tube and muti-valve )
Work pressure :20Mpa for CNG engine, 2.5Mpa for LPG engine
Work power 12V A/C
Install accessories
Liquid natural gas station
1.low cost
2.high efficiency
3.Liquid natural gas
Liquid natural gas station
2.high efficiency
3.Liquid natural gas
Liquid natural gas station
Liquid natural gas station
liquefied natural gas station
low cost
high efficiency
liquefied natural gas station
low cost
high efficiency
liquefied natural gas station
Low pressure Reducing & Metering Cabinet
Natural Gas Pressure regulating station
Gas metering station
SCADA system
Natural Gas Pressure Regulating Station,Gas pressure reducing & metering station
We design and manufacture the following plants:
* High Pressure City Gate and Offtake station;
* High-medium pressure Reducing & Metering Station;
* Low pressure Reducing & Metering Cabinet;
* Compressed natural gas reducing stations;
* Two-stage domestic reducing cabinet ;
* SCADA systems.
and following standard products:
* Turbine meter;
* Butterfly valve;
* Ball valve;
* Safety devices;
* Pressure regulator;
* Control valves;
* Other components.
Capacity of
completed
Natural Gas Pressure Regulating Station
Flow rate: 6000Sm3/h-160,000Sm3/h
Max Inlet pressure MPA:3.6
Min. Outlet pressure KPA:100
Application:
City gate station,long pipelines,power plant,oil field gas fuel power plant,gas turbine power plant etc.
Gas metering station
SCADA system
Natural Gas Pressure Regulating Station,Gas pressure reducing & metering station
We design and manufacture the following plants:
* High Pressure City Gate and Offtake station;
* High-medium pressure Reducing & Metering Station;
* Low pressure Reducing & Metering Cabinet;
* Compressed natural gas reducing stations;
* Two-stage domestic reducing cabinet ;
* SCADA systems.
and following standard products:
* Turbine meter;
* Butterfly valve;
* Ball valve;
* Safety devices;
* Pressure regulator;
* Control valves;
* Other components.
Capacity of
completed
Natural Gas Pressure Regulating Station
Flow rate: 6000Sm3/h-160,000Sm3/h
Max Inlet pressure MPA:3.6
Min. Outlet pressure KPA:100
Application:
City gate station,long pipelines,power plant,oil field gas fuel power plant,gas turbine power plant etc.
MTU gas genset
Gas engine 16V165RQ is newly developed products with modified designs and technical innovations, which are manufacture on the ba
The MTU engines incorporated the key technology of diesel engines 396 as blew which make Diesel Engines 396 compacted with the features of less weight, high power, better economic effects and longer service life:
Ø One-body engine case made of alloy iron casting,
Ø Combined piston with oil injecting cooling nozzles,
Ø Wat-type changeable cylinder liners,
Ø Plate-type high efficient heat exchanger,
Ø Exhaust system with three-layer walls for water cooling and heat insulation,
Ø Integrated accessories and standard interfaces,
Ø Everyday and periodic maintenance,
The MTU engines incorporated the key technology of diesel engines 396 as blew which make Diesel Engines 396 compacted with the features of less weight, high power, better economic effects and longer service life:
Ø One-body engine case made of alloy iron casting,
Ø Combined piston with oil injecting cooling nozzles,
Ø Wat-type changeable cylinder liners,
Ø Plate-type high efficient heat exchanger,
Ø Exhaust system with three-layer walls for water cooling and heat insulation,
Ø Integrated accessories and standard interfaces,
Ø Everyday and periodic maintenance,
Mini CNG Compressor Filling Equipment
Mini and Small, Much More Convenient for a small community such as one family, one company or group to use
LYX100T6 Natural Gas compressor adopted high-effective 4-stage compression, 2-satge filtration, mainly applied in filling natural gas tank, car. This system was adopted high-sensitive device and reliable safety mechanical structure, it can fill CNG car and bottle continuously.
Features:
1.4-stage,air-cooled,reciprocating piston CNG compression.
2.Specially treated alloy cylinder and piston.
3.Flame-proof electric motor and single-phase motor.
4.2-stage filter.
5.Anti-shock pressure gauge.
6.Filter is made by seamless aluminum alloy, outer can endure 550bar pressure.
7.Oil splash lubrication.
8.High-strenght nylon cooling fan assembly.
9.Terminal safety valve pressure stepless adjustment.
10.High temperature resistance plastic blowing steel frame.
11.Stainless inter-cooler and after cooler.
12.Manual condensate drain system.
13.Precision air-intake filter and oil, water separator.
14.High pressure safety valve for over load protection.
15.Quick connector filling gun.
LYX100T6 Natural gas compressor is device used for increasing pressure and transferring of CNG, compressing CNG from 0.1MPa to 25MPa.standard delivery rate is 6m3 per hour. through surge tank and flow controller control it as 10L per minute, it cleans out the oil and vapor after flowing separator and filter, the outlet natural gas quality accords to compressed natural gas standard.LYX-10 device is small, low-noise, high pressure and long working life. it has suitable delivery rate, wide using range, safety, reliable, low maintenance charge advantage.LYX100T6Natural gas compressor has convenient and smart “filling in place’ feature, it can apply in filling station, production line in factory, public filling station(parking lot, community),home filling station, research and development, testing in scientific research institute. in developed country, was mainly used for filling natural gas car.LYX100T6 also can be used in petrol industry, chemical industry, mine. it can compress natural gas, Nitrogen, air, Nitrogen Hydrogen,CO2,Propane etc.
LYX100T6 Natural Gas compressor adopted high-effective 4-stage compression, 2-satge filtration, mainly applied in filling natural gas tank, car. This system was adopted high-sensitive device and reliable safety mechanical structure, it can fill CNG car and bottle continuously.
Features:
1.4-stage,air-cooled,reciprocating piston CNG compression.
2.Specially treated alloy cylinder and piston.
3.Flame-proof electric motor and single-phase motor.
4.2-stage filter.
5.Anti-shock pressure gauge.
6.Filter is made by seamless aluminum alloy, outer can endure 550bar pressure.
7.Oil splash lubrication.
8.High-strenght nylon cooling fan assembly.
9.Terminal safety valve pressure stepless adjustment.
10.High temperature resistance plastic blowing steel frame.
11.Stainless inter-cooler and after cooler.
12.Manual condensate drain system.
13.Precision air-intake filter and oil, water separator.
14.High pressure safety valve for over load protection.
15.Quick connector filling gun.
LYX100T6 Natural gas compressor is device used for increasing pressure and transferring of CNG, compressing CNG from 0.1MPa to 25MPa.standard delivery rate is 6m3 per hour. through surge tank and flow controller control it as 10L per minute, it cleans out the oil and vapor after flowing separator and filter, the outlet natural gas quality accords to compressed natural gas standard.LYX-10 device is small, low-noise, high pressure and long working life. it has suitable delivery rate, wide using range, safety, reliable, low maintenance charge advantage.LYX100T6Natural gas compressor has convenient and smart “filling in place’ feature, it can apply in filling station, production line in factory, public filling station(parking lot, community),home filling station, research and development, testing in scientific research institute. in developed country, was mainly used for filling natural gas car.LYX100T6 also can be used in petrol industry, chemical industry, mine. it can compress natural gas, Nitrogen, air, Nitrogen Hydrogen,CO2,Propane etc.
API 5CT oil casing pipe
1. Our company has passed API certification and
2. Specialized petroleum casing pipe
3. Size: 4 1/2" -13 3/8
1. Standard: API 5CT-0735
2. Grade: K55 J55 N80 L80 T90 H40
3. OD: 114.30 339.72 mm (4.5000 -13.375 in)
4. WT: 5.21 -13.06 mm (0.205 -0.514 in)
5. Length: R1/R2/R3
6. Application: petroleumical, power station, machinery, pressure pipes for ship, boiler and overheating, etc.
7.Inspection: NDT, TESTED, MTC, third party inspection (SGS, BV, ABS etc.)
8. Product as per customers requirement.
9. We have the export right ourselves, our products has been exported to Canada, South Korea, Iran, UAE Pakistan, Japan and so on.
10.Trade terms: EXW, FOB, CFR, CIF, etc.
Terms of payment: T/T or L/C at sight.
11. Hebei Xinlian Petroleum Machinery Co., Ltd. Is located in Hope New District, MengcunCounty, Hebei Province, an area famous for the production of pipe fittings.
12. The management and the employees of the company sincerely welcome domestic and foreign friends to the company for business inquiry and negotiation.
2. Specialized petroleum casing pipe
3. Size: 4 1/2" -13 3/8
1. Standard: API 5CT-0735
2. Grade: K55 J55 N80 L80 T90 H40
3. OD: 114.30 339.72 mm (4.5000 -13.375 in)
4. WT: 5.21 -13.06 mm (0.205 -0.514 in)
5. Length: R1/R2/R3
6. Application: petroleumical, power station, machinery, pressure pipes for ship, boiler and overheating, etc.
7.Inspection: NDT, TESTED, MTC, third party inspection (SGS, BV, ABS etc.)
8. Product as per customers requirement.
9. We have the export right ourselves, our products has been exported to Canada, South Korea, Iran, UAE Pakistan, Japan and so on.
10.Trade terms: EXW, FOB, CFR, CIF, etc.
Terms of payment: T/T or L/C at sight.
11. Hebei Xinlian Petroleum Machinery Co., Ltd. Is located in Hope New District, MengcunCounty, Hebei Province, an area famous for the production of pipe fittings.
12. The management and the employees of the company sincerely welcome domestic and foreign friends to the company for business inquiry and negotiation.
Mini CNG Compressor Refuelling Equipment
Mini and Small, Much More Convenient for a small community such as one family, one company or group to use for the CNG products
LYX100T6 Natural Gas compressor adopted high-effective 4-stage compression, 2-satge filtration, mainly applied in filling natural gas tank, car. This system was adopted high-sensitive device and reliable safety mechanical structure, it can fill CNG car and bottle continuously.
Features:
1.4-stage,air-cooled,reciprocating piston CNG compression.
2.Specially treated alloy cylinder and piston.
3.Flame-proof electric motor and single-phase motor.
4.2-stage filter.
5.Anti-shock pressure gauge.
6.Filter is made by seamless aluminum alloy, outer can endure 550bar pressure.
7.Oil splash lubrication.
8.High-strenght nylon cooling fan assembly.
9.Terminal safety valve pressure stepless adjustment.
10.High temperature resistance plastic blowing steel frame.
11.Stainless inter-cooler and after cooler.
12.Manual condensate drain system.
13.Precision air-intake filter and oil, water separator.
14.High pressure safety valve for over load protection.
15.Quick connector filling gun.
LYX100T6 Natural gas compressor is device used for increasing pressure and transferring of CNG, compressing CNG from 0.1MPa to 25MPa.standard delivery rate is 6m3 per hour. through surge tank and flow controller control it as 10L per minute, it cleans out the oil and vapor after flowing separator and filter, the outlet natural gas quality accords to compressed natural gas standard.LYX-10 device is small, low-noise, high pressure and long working life. it has suitable delivery rate, wide using range, safety, reliable, low maintenance charge advantage.LYX100T6Natural gas compressor has convenient and smart “filling in place’ feature, it can apply in filling station, production line in factory, public filling station(parking lot, community),home filling station, research and development, testing in scientific research institute. in developed country, was mainly used for filling natural gas car.LYX100T6 also can be used in petrol industry, chemical industry, mine. it can compress natural gas, Nitrogen, air, Nitrogen Hydrogen,CO2,Propane etc.
LYX100T6 Natural Gas compressor adopted high-effective 4-stage compression, 2-satge filtration, mainly applied in filling natural gas tank, car. This system was adopted high-sensitive device and reliable safety mechanical structure, it can fill CNG car and bottle continuously.
Features:
1.4-stage,air-cooled,reciprocating piston CNG compression.
2.Specially treated alloy cylinder and piston.
3.Flame-proof electric motor and single-phase motor.
4.2-stage filter.
5.Anti-shock pressure gauge.
6.Filter is made by seamless aluminum alloy, outer can endure 550bar pressure.
7.Oil splash lubrication.
8.High-strenght nylon cooling fan assembly.
9.Terminal safety valve pressure stepless adjustment.
10.High temperature resistance plastic blowing steel frame.
11.Stainless inter-cooler and after cooler.
12.Manual condensate drain system.
13.Precision air-intake filter and oil, water separator.
14.High pressure safety valve for over load protection.
15.Quick connector filling gun.
LYX100T6 Natural gas compressor is device used for increasing pressure and transferring of CNG, compressing CNG from 0.1MPa to 25MPa.standard delivery rate is 6m3 per hour. through surge tank and flow controller control it as 10L per minute, it cleans out the oil and vapor after flowing separator and filter, the outlet natural gas quality accords to compressed natural gas standard.LYX-10 device is small, low-noise, high pressure and long working life. it has suitable delivery rate, wide using range, safety, reliable, low maintenance charge advantage.LYX100T6Natural gas compressor has convenient and smart “filling in place’ feature, it can apply in filling station, production line in factory, public filling station(parking lot, community),home filling station, research and development, testing in scientific research institute. in developed country, was mainly used for filling natural gas car.LYX100T6 also can be used in petrol industry, chemical industry, mine. it can compress natural gas, Nitrogen, air, Nitrogen Hydrogen,CO2,Propane etc.
Mobile CNG Station (Daughter station)
Mobile CNG station: combine compressing system, PLC control, dispenser system in one skid-mounted case, easy setup and flexible
Mobile CNG Station (Daughter station) Supply Scope:
Compressor (1set)
Dual-gun dispenser (2 sets)
Controlling system (1set)
Operating system (1set)
3200L Hydraulic oil
Transporting parts: semi-trailer (tractor and cylinder cascade not on it)
Mobile CNG Station (Daughter station) Supply Scope:
Compressor (1set)
Dual-gun dispenser (2 sets)
Controlling system (1set)
Operating system (1set)
3200L Hydraulic oil
Transporting parts: semi-trailer (tractor and cylinder cascade not on it)
Multiplaz3500 save energy welding machine
save energy welding machine
1.obtain CE UL TUV ,CCC,EMC
2.cuts ,welds brazes and solders all known materials
3.safty,low pow
save energy welding machine
only use water and connect electricity
1,cut+weld+braze+solder machine+Etc.
2.Normal water for cutting and 45% alcohol for welding .
3.New concept ,cost effective ,no gas ,no attach device and environmently friendly
In industries:
1,DIYtool:such as garden equipment/house /home appliances maintance ,cost effective ,safe ,portable,muntifuction and easy to use .
2.mine industrial installation repair.
3.construction industry ,house management,indoor decoration.
4.metal processing.
5.Repair for engineering machinery
6.Repair for casting and mould
save energy welding machine
1.
Multiplaz 3500
is a compact system that you can put in a tool bag and carry it any-where. This unit’s weight and size make it the best in its class. The simplicity of using the Multiplaz 3500 lets the beginner master the skill of plasma welding, cutting and soldering quickly and easily.
2.Using Multiplaz 3500 for welding and cutting does not require dangerous gas bot-tles or a special welding station typically necessary with other equipment.
3.Using Multiplaz 3500 for arc welding, does not require the typical three-phase electrical connection other weld-ers need. Residential power outlets
230v/115v
are the only requirements.
The weight and volume information of one pcs machine is :
Gross weight: 15KG, Net weight: 11.4 kg, Dimension: 56*32*29cm , Volume is about 0.05CBM
If you are interest you may visit our website
www.multiplaz .com
videos are available on Youtube, search for Multiplaz.
Performance Specification
Process liquid for cutting and welding
*
Water
Process liquid for welding and soldering
Water - Alcohol
Electrical Supply (single phase )
V
100 - 253
Supply Frequency
Hz
50 - 60
Maximum Power Requirement for network voltage 230v
kWt
3.5
Maximum Power Requirement for network voltage 115v
kWt
2.0
Welding type
Plasma and plasma arc
Plasma _ame temperature
°F (°C)
14400 (8000)
Cutting capabilities (regular steel)
In (mm)
up to 3/8(10)
Welding capabilities (regular steel
inch (mm)
from 1/64 (0.4) up to 2 (50)
Idle Voltage
V
68
Time of operation with one torch filling
min
20 - 30
Torch Steam Pressure
bar (pci)
0.4 - 1.2 (5.7 -17)
Duty cycle
%
100
Power Unit Dimensions (l x h x w)
inch mm
15 x 7 ½x 5 ½ 380 x 190 x140
Power Unit Weight
lbs (kg)
17 1/2 (8)
Torch Dimensions, (l x h x w)
nch mm
8 x 7 ½x 2 ½ 205 x 194 x 60
Torch Weight (dry)
lbs (kg)
2 (0.9)
Power Cable Length
ft (m)
6 ½ (2)
Torch Cable Length
ft (m)
6 ½ (2)
Maximum Cable Length w/ Extensions
ft (m)
45 (14)
1.obtain CE UL TUV ,CCC,EMC
2.cuts ,welds brazes and solders all known materials
3.safty,low pow
save energy welding machine
only use water and connect electricity
1,cut+weld+braze+solder machine+Etc.
2.Normal water for cutting and 45% alcohol for welding .
3.New concept ,cost effective ,no gas ,no attach device and environmently friendly
In industries:
1,DIYtool:such as garden equipment/house /home appliances maintance ,cost effective ,safe ,portable,muntifuction and easy to use .
2.mine industrial installation repair.
3.construction industry ,house management,indoor decoration.
4.metal processing.
5.Repair for engineering machinery
6.Repair for casting and mould
save energy welding machine
1.
Multiplaz 3500
is a compact system that you can put in a tool bag and carry it any-where. This unit’s weight and size make it the best in its class. The simplicity of using the Multiplaz 3500 lets the beginner master the skill of plasma welding, cutting and soldering quickly and easily.
2.Using Multiplaz 3500 for welding and cutting does not require dangerous gas bot-tles or a special welding station typically necessary with other equipment.
3.Using Multiplaz 3500 for arc welding, does not require the typical three-phase electrical connection other weld-ers need. Residential power outlets
230v/115v
are the only requirements.
The weight and volume information of one pcs machine is :
Gross weight: 15KG, Net weight: 11.4 kg, Dimension: 56*32*29cm , Volume is about 0.05CBM
If you are interest you may visit our website
www.multiplaz .com
videos are available on Youtube, search for Multiplaz.
Performance Specification
Process liquid for cutting and welding
*
Water
Process liquid for welding and soldering
Water - Alcohol
Electrical Supply (single phase )
V
100 - 253
Supply Frequency
Hz
50 - 60
Maximum Power Requirement for network voltage 230v
kWt
3.5
Maximum Power Requirement for network voltage 115v
kWt
2.0
Welding type
Plasma and plasma arc
Plasma _ame temperature
°F (°C)
14400 (8000)
Cutting capabilities (regular steel)
In (mm)
up to 3/8(10)
Welding capabilities (regular steel
inch (mm)
from 1/64 (0.4) up to 2 (50)
Idle Voltage
V
68
Time of operation with one torch filling
min
20 - 30
Torch Steam Pressure
bar (pci)
0.4 - 1.2 (5.7 -17)
Duty cycle
%
100
Power Unit Dimensions (l x h x w)
inch mm
15 x 7 ½x 5 ½ 380 x 190 x140
Power Unit Weight
lbs (kg)
17 1/2 (8)
Torch Dimensions, (l x h x w)
nch mm
8 x 7 ½x 2 ½ 205 x 194 x 60
Torch Weight (dry)
lbs (kg)
2 (0.9)
Power Cable Length
ft (m)
6 ½ (2)
Torch Cable Length
ft (m)
6 ½ (2)
Maximum Cable Length w/ Extensions
ft (m)
45 (14)
NATURAL GAS GENERATOR
high average effective pressure, low heat load of gas engine, lower heat, lower material use
NGV-2 CNG cylinder
NGV steel lined glass fiber hoop wrappedCNG cylinder .CNG-2 type
SYP cng cylinder is strict product in according to ISO11439:2000 and DOT 3AA(American area use) . each cylinder will be 100% achieve hydraulic pressure test before we ship to our customer .
All the cylinder is Pass finish the type test and choose the 34CrMo4 seamless steel tube for Type 1 and Type 2 CNG cylinder
Till now SYP can offer to our customer the full serice CNG cylinder product as following
Type 1 steel CNG cylinder
Type 2 Glass fiber hoop wrapped Steel CNG cylinder ISO11439:2000 standard
Type 3 Carbon fiber full wrapped aluminum CNG cylinder
Cylinder size and volume we offer
Type 1 279mm seriese from 20L , 30L. 35L. 40L. 55L. 60L. 70L. 80L
325mm series from 40L. 50L. 60L, 70L. 80L. 90L. 100L.110L. 120L
356mm series from 60L , 70L, 80L, 90L, 100L, 110L, 120L 130L. 140L
406mm series from 60L , 70L, 80L, 90L, 100L, 110L, 120L 130L. 140L
Note: DOT standart will be point in advance
Type 2 350mm series from 40L. 50L. 60L, 70L. 80L. 90L. 100L.110L. 120L
360mm series from 60L , 70L, 80L, 90L, 100L, 110L, 120L 130L. 140L
420mm series from 60L , 70L, 80L, 90L, 100L, 110L, 120L 130L. 140L
Note: CNG cylinder is with 15 year quality warranty
1)CNG-2 type
2)Lined glass fiber hoop wrapped cylinder
3)DOT standadart
4)ISO 11439:2000 , DOT .GB standart can be choose
4)20L to 140 L can be choose
SYP cng cylinder is strict product in according to ISO11439:2000 and DOT 3AA(American area use) . each cylinder will be 100% achieve hydraulic pressure test before we ship to our customer .
All the cylinder is Pass finish the type test and choose the 34CrMo4 seamless steel tube for Type 1 and Type 2 CNG cylinder
Till now SYP can offer to our customer the full serice CNG cylinder product as following
Type 1 steel CNG cylinder
Type 2 Glass fiber hoop wrapped Steel CNG cylinder ISO11439:2000 standard
Type 3 Carbon fiber full wrapped aluminum CNG cylinder
Cylinder size and volume we offer
Type 1 279mm seriese from 20L , 30L. 35L. 40L. 55L. 60L. 70L. 80L
325mm series from 40L. 50L. 60L, 70L. 80L. 90L. 100L.110L. 120L
356mm series from 60L , 70L, 80L, 90L, 100L, 110L, 120L 130L. 140L
406mm series from 60L , 70L, 80L, 90L, 100L, 110L, 120L 130L. 140L
Note: DOT standart will be point in advance
Type 2 350mm series from 40L. 50L. 60L, 70L. 80L. 90L. 100L.110L. 120L
360mm series from 60L , 70L, 80L, 90L, 100L, 110L, 120L 130L. 140L
420mm series from 60L , 70L, 80L, 90L, 100L, 110L, 120L 130L. 140L
Note: CNG cylinder is with 15 year quality warranty
1)CNG-2 type
2)Lined glass fiber hoop wrapped cylinder
3)DOT standadart
4)ISO 11439:2000 , DOT .GB standart can be choose
4)20L to 140 L can be choose
Natural Gas Dehydration Unit For CNG Refueling Station
Is especially used for deep dehydration of natural gas in CNG gas filling station
The general technical parameters that can be meet by the deep dehydration device of natural gas
1.Model Low-pressure front, ultra low pressure front, large water content, super flow, high pressure postposition etc.
2. Equipment design working pressure range
3. Maximum handing ability6000Nm
3
/h(1.0mpa)
4. Working environment temperature -30 50°C
5 .Design temperature 345°C
6. Renewable heating temperature 210~230 °C
7. Product gas ordinary pressure dew point ≤-60°C
8.Maximum water content of raw material gas≤3500PPmv
9. Equipment overall pressure drop ≤0.03MPa
10.Adsorbent Molecular sieve
11.Regenerative method Built-in electric furnace, closed loop recycling
12.Cooling-down method Air-cooled or water cooled
13. Number of drying tower 2-4 tower
14.Class of explosive-proof dIIBT4
15. Level of protection IP64
16. Power requirements 380V±7%
17.Electric power around 40% smaller than other similar manufacturers
18.Control method Dedicated control cabinet, manual switching, automatic regeneration, manual discharge
19. Equipment noise ≤70 decibel
20.Measures to Ambient temperature is below 5 prevent ice block 5 °C heating band automatically
21.Fixed mode ship-shaped skid base, without to fix, easy to install
Descriptions of features and performance of equipment
1. Equipment imported the advanced technology from Italy and the United States, novel structure, easy operation, maintenance-free after commissioning. Using the 2 to 4 tower structure for the same equipment, single-stage adsorption, can handle high water content and large flows of feed gas, big quantity of adsorption, long cycle of adsorption, low depth of dehydration, can be operate continuously, continuous output of normal atmospheric dew point lower than -60°C purity, dry gas . Eliminate duplication investment of purchase multiple equipment.
2. The unique closed-loop recycling technology, built-in electric furnace, gas through the heater, flow of gas is slow, heating time is long, with high heating efficiency, heat evenly, small heat loss, to ensure full utilization of energy and greatly reduce the electric power and renewable energy, heater power is accompanied about 60% of other manufacturers. Electric furnace with constant temperature design, the entire regeneration process control at a constant heating temperature range, avoid the damage and loss of power of the electric furnace itself by frequent starting and stopping, effectively reducing the operating costs, extend equipment’s service life.
3. Vessel shell design, manufacture, testing, acceptance according to GB150 <Steel pressure vessels>, and the State Quality and Technical Supervision issued by the <Pressure Vessel Safety Technology supervision order>. Provide a full set of the required documentation of pressure vessels.
4. Original container and furnace design, ensuring smooth gas flow, bed stability, and elimination of damage to the container due to heating or cooling; absorption tower using 16 MnR material, resistant to fatigue, to run at low pressure, the container services for a more longer time.
5. Drying tower configured a filter can effectively remove the particulate component of natural gas , outlet with a fine filter, to prevent secondary pollution caused by adsorbent off, reducing the duplication process pipeline, reducing the pressure drop of equipment, saving the user’s investment cost.
6.This device is equipped with special cabinet, can accurately control the temperature when regenerating the device process, and in accordance with set procedures for movement control regeneration system; control panel set regenerate manual and automatic mode, and manually comes priority. When the regeneration is cycling, it can start or stop the heater, cooler at any time according to actual needs. Control procedures into the work order and interlocking relationships, to avoid human errors caused the losses. Based on the cooling fan, it has set up and down line running between temperature, to ensure the regeneration system does not over-temperature, regenerative heat exchanger does not ice block in winter, and the dew point temperature and dry gas can be observed.
7. For control system, except drying tower, switchover of regeneration tower need manual valve, all other actions will be automatically by the device. When the work tower is adsorbing, output dry gas; when regeneration tower is adsorbing, use a control valve to control the heating temperature of heater, when the regeneration has been finished, heater will automatically stop heating, start doing cold blow, when the temperature inside of the tower blow to the set temperature, the control cabinet will automatically stop all running power system, complete regeneration; all the control parameter can be remodify on controller, flexible and easy.
8. On drying tower device has set pressure gauge, temperature meter, visual display of work pressure and regeneration temperature and other working conditions; drying tower absorption tower has set discharge port with dedicated loading, easy replacement of filling.
9. Drying tower covered with high efficient insulation coating, good effect of insulation, beautiful looking.
10. Electric heating elements are using stainless steel material, thermal conductivity of large area, heating pipe with long service life,ensured that it’s working life will not less than 3 years.
11.Cooler adopts air-cooled efficient plate heat exchanger, it is 2500~4000 M
2
/M
3
higher than surface area. Compared with the same heat transfer area of the tube-fin heat exchanger, the volume was reduced 1.3 times, weight has reduced of more than 1 time.
12. Power generation location of device is reasonable, focus on external connection, produced according DIIBT4 explosion levels.
13.Galvanized pipe through the paint treatment, outdoor installation, long-term use does not fade.
The general technical parameters that can be meet by the deep dehydration device of natural gas
1.Model Low-pressure front, ultra low pressure front, large water content, super flow, high pressure postposition etc.
2. Equipment design working pressure range
3. Maximum handing ability6000Nm
3
/h(1.0mpa)
4. Working environment temperature -30 50°C
5 .Design temperature 345°C
6. Renewable heating temperature 210~230 °C
7. Product gas ordinary pressure dew point ≤-60°C
8.Maximum water content of raw material gas≤3500PPmv
9. Equipment overall pressure drop ≤0.03MPa
10.Adsorbent Molecular sieve
11.Regenerative method Built-in electric furnace, closed loop recycling
12.Cooling-down method Air-cooled or water cooled
13. Number of drying tower 2-4 tower
14.Class of explosive-proof dIIBT4
15. Level of protection IP64
16. Power requirements 380V±7%
17.Electric power around 40% smaller than other similar manufacturers
18.Control method Dedicated control cabinet, manual switching, automatic regeneration, manual discharge
19. Equipment noise ≤70 decibel
20.Measures to Ambient temperature is below 5 prevent ice block 5 °C heating band automatically
21.Fixed mode ship-shaped skid base, without to fix, easy to install
Descriptions of features and performance of equipment
1. Equipment imported the advanced technology from Italy and the United States, novel structure, easy operation, maintenance-free after commissioning. Using the 2 to 4 tower structure for the same equipment, single-stage adsorption, can handle high water content and large flows of feed gas, big quantity of adsorption, long cycle of adsorption, low depth of dehydration, can be operate continuously, continuous output of normal atmospheric dew point lower than -60°C purity, dry gas . Eliminate duplication investment of purchase multiple equipment.
2. The unique closed-loop recycling technology, built-in electric furnace, gas through the heater, flow of gas is slow, heating time is long, with high heating efficiency, heat evenly, small heat loss, to ensure full utilization of energy and greatly reduce the electric power and renewable energy, heater power is accompanied about 60% of other manufacturers. Electric furnace with constant temperature design, the entire regeneration process control at a constant heating temperature range, avoid the damage and loss of power of the electric furnace itself by frequent starting and stopping, effectively reducing the operating costs, extend equipment’s service life.
3. Vessel shell design, manufacture, testing, acceptance according to GB150 <Steel pressure vessels>, and the State Quality and Technical Supervision issued by the <Pressure Vessel Safety Technology supervision order>. Provide a full set of the required documentation of pressure vessels.
4. Original container and furnace design, ensuring smooth gas flow, bed stability, and elimination of damage to the container due to heating or cooling; absorption tower using 16 MnR material, resistant to fatigue, to run at low pressure, the container services for a more longer time.
5. Drying tower configured a filter can effectively remove the particulate component of natural gas , outlet with a fine filter, to prevent secondary pollution caused by adsorbent off, reducing the duplication process pipeline, reducing the pressure drop of equipment, saving the user’s investment cost.
6.This device is equipped with special cabinet, can accurately control the temperature when regenerating the device process, and in accordance with set procedures for movement control regeneration system; control panel set regenerate manual and automatic mode, and manually comes priority. When the regeneration is cycling, it can start or stop the heater, cooler at any time according to actual needs. Control procedures into the work order and interlocking relationships, to avoid human errors caused the losses. Based on the cooling fan, it has set up and down line running between temperature, to ensure the regeneration system does not over-temperature, regenerative heat exchanger does not ice block in winter, and the dew point temperature and dry gas can be observed.
7. For control system, except drying tower, switchover of regeneration tower need manual valve, all other actions will be automatically by the device. When the work tower is adsorbing, output dry gas; when regeneration tower is adsorbing, use a control valve to control the heating temperature of heater, when the regeneration has been finished, heater will automatically stop heating, start doing cold blow, when the temperature inside of the tower blow to the set temperature, the control cabinet will automatically stop all running power system, complete regeneration; all the control parameter can be remodify on controller, flexible and easy.
8. On drying tower device has set pressure gauge, temperature meter, visual display of work pressure and regeneration temperature and other working conditions; drying tower absorption tower has set discharge port with dedicated loading, easy replacement of filling.
9. Drying tower covered with high efficient insulation coating, good effect of insulation, beautiful looking.
10. Electric heating elements are using stainless steel material, thermal conductivity of large area, heating pipe with long service life,ensured that it’s working life will not less than 3 years.
11.Cooler adopts air-cooled efficient plate heat exchanger, it is 2500~4000 M
2
/M
3
higher than surface area. Compared with the same heat transfer area of the tube-fin heat exchanger, the volume was reduced 1.3 times, weight has reduced of more than 1 time.
12. Power generation location of device is reasonable, focus on external connection, produced according DIIBT4 explosion levels.
13.Galvanized pipe through the paint treatment, outdoor installation, long-term use does not fade.
Natural Gas Dehydration Unit For Cng Filling Station
Is especially used for deep dehydration of natural gas in CNG gas filling station
The general technical parameters that can be meet by the deep dehydration device of natural gas
1.Model Low-pressure front, ultra low pressure front, large water content, super flow, high pressure postposition etc.
2. Equipment design working pressure range
3. Maximum handing ability6000Nm
3
/h(1.0mpa)
4. Working environment temperature -30 50°C
5 .Design temperature 345°C
6. Renewable heating temperature 210~230 °C
7. Product gas ordinary pressure dew point ≤-60°C
8.Maximum water content of raw material gas≤3500PPmv
9. Equipment overall pressure drop ≤0.03MPa
10.Adsorbent Molecular sieve
11.Regenerative method Built-in electric furnace, closed loop recycling
12.Cooling-down method Air-cooled or water cooled
13. Number of drying tower 2-4 tower
14.Class of explosive-proof dIIBT4
15. Level of protection IP64
16. Power requirements 380V±7%
17.Electric power around 40% smaller than other similar manufacturers
18.Control method Dedicated control cabinet, manual switching, automatic regeneration, manual discharge
19. Equipment noise ≤70 decibel
20.Measures to Ambient temperature is below 5 prevent ice block 5 °C heating band automatically
21.Fixed mode ship-shaped skid base, without to fix, easy to install
Descriptions of features and performance of equipment
1. Equipment imported the advanced technology from Italy and the United States, novel structure, easy operation, maintenance-free after commissioning. Using the 2 to 4 tower structure for the same equipment, single-stage adsorption, can handle high water content and large flows of feed gas, big quantity of adsorption, long cycle of adsorption, low depth of dehydration, can be operate continuously, continuous output of normal atmospheric dew point lower than -60°C purity, dry gas . Eliminate duplication investment of purchase multiple equipment.
2. The unique closed-loop recycling technology, built-in electric furnace, gas through the heater, flow of gas is slow, heating time is long, with high heating efficiency, heat evenly, small heat loss, to ensure full utilization of energy and greatly reduce the electric power and renewable energy, heater power is accompanied about 60% of other manufacturers. Electric furnace with constant temperature design, the entire regeneration process control at a constant heating temperature range, avoid the damage and loss of power of the electric furnace itself by frequent starting and stopping, effectively reducing the operating costs, extend equipment’s service life.
3. Vessel shell design, manufacture, testing, acceptance according to GB150 <Steel pressure vessels>, and the State Quality and Technical Supervision issued by the <Pressure Vessel Safety Technology supervision order>. Provide a full set of the required documentation of pressure vessels.
4. Original container and furnace design, ensuring smooth gas flow, bed stability, and elimination of damage to the container due to heating or cooling; absorption tower using 16 MnR material, resistant to fatigue, to run at low pressure, the container services for a more longer time.
5. Drying tower configured a filter can effectively remove the particulate component of natural gas , outlet with a fine filter, to prevent secondary pollution caused by adsorbent off, reducing the duplication process pipeline, reducing the pressure drop of equipment, saving the user’s investment cost.
6.This device is equipped with special cabinet, can accurately control the temperature when regenerating the device process, and in accordance with set procedures for movement control regeneration system; control panel set regenerate manual and automatic mode, and manually comes priority. When the regeneration is cycling, it can start or stop the heater, cooler at any time according to actual needs. Control procedures into the work order and interlocking relationships, to avoid human errors caused the losses. Based on the cooling fan, it has set up and down line running between temperature, to ensure the regeneration system does not over-temperature, regenerative heat exchanger does not ice block in winter, and the dew point temperature and dry gas can be observed.
7. For control system, except drying tower, switchover of regeneration tower need manual valve, all other actions will be automatically by the device. When the work tower is adsorbing, output dry gas; when regeneration tower is adsorbing, use a control valve to control the heating temperature of heater, when the regeneration has been finished, heater will automatically stop heating, start doing cold blow, when the temperature inside of the tower blow to the set temperature, the control cabinet will automatically stop all running power system, complete regeneration; all the control parameter can be remodify on controller, flexible and easy.
8. On drying tower device has set pressure gauge, temperature meter, visual display of work pressure and regeneration temperature and other working conditions; drying tower absorption tower has set discharge port with dedicated loading, easy replacement of filling.
9. Drying tower covered with high efficient insulation coating, good effect of insulation, beautiful looking.
10. Electric heating elements are using stainless steel material, thermal conductivity of large area, heating pipe with long service life,ensured that it’s working life will not less than 3 years.
11.Cooler adopts air-cooled efficient plate heat exchanger, it is 2500~4000 M
2
/M
3
higher than surface area. Compared with the same heat transfer area of the tube-fin heat exchanger, the volume was reduced 1.3 times, weight has reduced of more than 1 time.
12. Power generation location of device is reasonable, focus on external connection, produced according DIIBT4 explosion levels.
13.Galvanized pipe through the paint treatment, outdoor installation, long-term use does not fade.
The general technical parameters that can be meet by the deep dehydration device of natural gas
1.Model Low-pressure front, ultra low pressure front, large water content, super flow, high pressure postposition etc.
2. Equipment design working pressure range
3. Maximum handing ability6000Nm
3
/h(1.0mpa)
4. Working environment temperature -30 50°C
5 .Design temperature 345°C
6. Renewable heating temperature 210~230 °C
7. Product gas ordinary pressure dew point ≤-60°C
8.Maximum water content of raw material gas≤3500PPmv
9. Equipment overall pressure drop ≤0.03MPa
10.Adsorbent Molecular sieve
11.Regenerative method Built-in electric furnace, closed loop recycling
12.Cooling-down method Air-cooled or water cooled
13. Number of drying tower 2-4 tower
14.Class of explosive-proof dIIBT4
15. Level of protection IP64
16. Power requirements 380V±7%
17.Electric power around 40% smaller than other similar manufacturers
18.Control method Dedicated control cabinet, manual switching, automatic regeneration, manual discharge
19. Equipment noise ≤70 decibel
20.Measures to Ambient temperature is below 5 prevent ice block 5 °C heating band automatically
21.Fixed mode ship-shaped skid base, without to fix, easy to install
Descriptions of features and performance of equipment
1. Equipment imported the advanced technology from Italy and the United States, novel structure, easy operation, maintenance-free after commissioning. Using the 2 to 4 tower structure for the same equipment, single-stage adsorption, can handle high water content and large flows of feed gas, big quantity of adsorption, long cycle of adsorption, low depth of dehydration, can be operate continuously, continuous output of normal atmospheric dew point lower than -60°C purity, dry gas . Eliminate duplication investment of purchase multiple equipment.
2. The unique closed-loop recycling technology, built-in electric furnace, gas through the heater, flow of gas is slow, heating time is long, with high heating efficiency, heat evenly, small heat loss, to ensure full utilization of energy and greatly reduce the electric power and renewable energy, heater power is accompanied about 60% of other manufacturers. Electric furnace with constant temperature design, the entire regeneration process control at a constant heating temperature range, avoid the damage and loss of power of the electric furnace itself by frequent starting and stopping, effectively reducing the operating costs, extend equipment’s service life.
3. Vessel shell design, manufacture, testing, acceptance according to GB150 <Steel pressure vessels>, and the State Quality and Technical Supervision issued by the <Pressure Vessel Safety Technology supervision order>. Provide a full set of the required documentation of pressure vessels.
4. Original container and furnace design, ensuring smooth gas flow, bed stability, and elimination of damage to the container due to heating or cooling; absorption tower using 16 MnR material, resistant to fatigue, to run at low pressure, the container services for a more longer time.
5. Drying tower configured a filter can effectively remove the particulate component of natural gas , outlet with a fine filter, to prevent secondary pollution caused by adsorbent off, reducing the duplication process pipeline, reducing the pressure drop of equipment, saving the user’s investment cost.
6.This device is equipped with special cabinet, can accurately control the temperature when regenerating the device process, and in accordance with set procedures for movement control regeneration system; control panel set regenerate manual and automatic mode, and manually comes priority. When the regeneration is cycling, it can start or stop the heater, cooler at any time according to actual needs. Control procedures into the work order and interlocking relationships, to avoid human errors caused the losses. Based on the cooling fan, it has set up and down line running between temperature, to ensure the regeneration system does not over-temperature, regenerative heat exchanger does not ice block in winter, and the dew point temperature and dry gas can be observed.
7. For control system, except drying tower, switchover of regeneration tower need manual valve, all other actions will be automatically by the device. When the work tower is adsorbing, output dry gas; when regeneration tower is adsorbing, use a control valve to control the heating temperature of heater, when the regeneration has been finished, heater will automatically stop heating, start doing cold blow, when the temperature inside of the tower blow to the set temperature, the control cabinet will automatically stop all running power system, complete regeneration; all the control parameter can be remodify on controller, flexible and easy.
8. On drying tower device has set pressure gauge, temperature meter, visual display of work pressure and regeneration temperature and other working conditions; drying tower absorption tower has set discharge port with dedicated loading, easy replacement of filling.
9. Drying tower covered with high efficient insulation coating, good effect of insulation, beautiful looking.
10. Electric heating elements are using stainless steel material, thermal conductivity of large area, heating pipe with long service life,ensured that it’s working life will not less than 3 years.
11.Cooler adopts air-cooled efficient plate heat exchanger, it is 2500~4000 M
2
/M
3
higher than surface area. Compared with the same heat transfer area of the tube-fin heat exchanger, the volume was reduced 1.3 times, weight has reduced of more than 1 time.
12. Power generation location of device is reasonable, focus on external connection, produced according DIIBT4 explosion levels.
13.Galvanized pipe through the paint treatment, outdoor installation, long-term use does not fade.
Natural Gas Pressure regulating station
Natural Gas Pressure regulating station
Gas metering station
SCADA system
Natural Gas Pressure Regulating Station,Gas pressure reducing & metering station
We design and manufacture the following plants:
* High Pressure City Gate and Offtake station;
* High-medium pressure Reducing & Metering Station;
* Low pressure Reducing & Metering Cabinet;
* Compressed natural gas reducing stations;
* Two-stage domestic reducing cabinet ;
* SCADA systems.
and following standard products:
* Turbine meter;
* Butterfly valve;
* Ball valve;
* Safety devices;
* Pressure regulator;
* Control valves;
* Other components.
Capacity of
completed
Natural Gas Pressure Regulating Station
Flow rate: 6000Sm3/h-160,000Sm3/h
Max Inlet pressure MPA:3.6
Min. Outlet pressure KPA:100
Application:
City gate station,long pipelines,power plant,oil field gas fuel power plant,gas turbine power plant etc.
Gas metering station
SCADA system
Natural Gas Pressure Regulating Station,Gas pressure reducing & metering station
We design and manufacture the following plants:
* High Pressure City Gate and Offtake station;
* High-medium pressure Reducing & Metering Station;
* Low pressure Reducing & Metering Cabinet;
* Compressed natural gas reducing stations;
* Two-stage domestic reducing cabinet ;
* SCADA systems.
and following standard products:
* Turbine meter;
* Butterfly valve;
* Ball valve;
* Safety devices;
* Pressure regulator;
* Control valves;
* Other components.
Capacity of
completed
Natural Gas Pressure Regulating Station
Flow rate: 6000Sm3/h-160,000Sm3/h
Max Inlet pressure MPA:3.6
Min. Outlet pressure KPA:100
Application:
City gate station,long pipelines,power plant,oil field gas fuel power plant,gas turbine power plant etc.
Natural gas generator 400KW /500KVA
Natural gas generator , with Stamford alternator
Product: Natural Gas Generaors
Power range : 200KVA to 625 KVA
Gas Engine: Chinese Top Brand Gas Engine
Alternator: Stamford
Thermal capacity:≥41860 KJ/m
3
CH
4
: ≥85% (Volume Percentage)
S:≤460 mg/ m3
H2S:≤20 mg/ m3
Gas pressure:80-100 kpa Without separator/100-500 kpa with separator
The gas should be treated without liquid. The size of impurity in the gas should be smaller than 0.005mm, and the content should be no more than 0.03g/m
3
. NoteGas volume condition: 101.3kPa20.
S
≤460 mg/ m3
Item
Specification
Thermal capacity
≥41860 KJ/m
3
CH
4
≥85% (Volume Percentage)
S
≤460 mg/ m3
H
2
S
≤20 mg/ m3
Gas pressure
80-100 kpaWithout separator/100-500 kpawith separator
Product: Natural Gas Generaors
Power range : 200KVA to 625 KVA
Gas Engine: Chinese Top Brand Gas Engine
Alternator: Stamford
Thermal capacity:≥41860 KJ/m
3
CH
4
: ≥85% (Volume Percentage)
S:≤460 mg/ m3
H2S:≤20 mg/ m3
Gas pressure:80-100 kpa Without separator/100-500 kpa with separator
The gas should be treated without liquid. The size of impurity in the gas should be smaller than 0.005mm, and the content should be no more than 0.03g/m
3
. NoteGas volume condition: 101.3kPa20.
S
≤460 mg/ m3
Item
Specification
Thermal capacity
≥41860 KJ/m
3
CH
4
≥85% (Volume Percentage)
S
≤460 mg/ m3
H
2
S
≤20 mg/ m3
Gas pressure
80-100 kpaWithout separator/100-500 kpawith separator
New GSM Gas Leak Controller alarm,S140,2 Relay outputs
GSM Gas Leak Controller alarm,S140;
4I/2O/USB Ports;
Remote control machines;
GSM SMS Remote Control;
GSM Switch
GSM Gas Leak Controller alarm,S140;
4I/2O/USB Ports;
Remote control machines;
GSM SMS Remote Control;
GSM Alarm system;GSM Switch
The GSM SMS Controller Alarm is a very simple device which can be used for authorized door access, controlling gates, switching of remote equipments, car parking systems. Actually the GSM SMS Controller can be used in places which require turning ON/OFF your system, machines, equipments remotely with a SMS text from your mobile phone and protect your assets.
Moreover, the GSM SMS Controller-Alarm with 2 digital inputs, when any one of the inputs triggered, will start the siren or switch on the light automatically. in the meanwhile, the GSM SMS Controller will send SMS Alert the to owners immediately. This is very useful if you need protect your assets with low cost solution.
Mainly Features of the GSM SMS Controller-Alarm S140:
1 relay output (240VAC@3A) can be switched ON/OFF by sending a SMS text;
1 relay output (240VAC@3A) can be switch on 4minutes if any inputs triggered;
4 Alarm logic inputs, NC or NO and EOL is optional;
3 SMS Alert numbers and 5 auto-dial numbers can accept to the alarm message;
Two-way voice communication by external microphone and speaker;
Supports armed, disarmed, inquiry status, switch on or off relay output by SMS Commands;
Password protected, prevents unauthorized user;
Can be set up and programmed from PC Programmer by USB cable;
Time stamped alarm messages;
Backup rechargeable battery inside, can work for 24hours when power off;
Can be operated from anywhere, no distance limit;
Based on GSM Network, applied to many applications.
A Professional GSM Alarms,GSM Alarm system,GSM MMS Alarm,GSM House Alarm,GSM Control Alarm, GSM SMS Alarms,Fixed Celluar Terminal,Fixed Wireless Terminal OEM ODM Manufacturer in China.
4I/2O/USB Ports;
Remote control machines;
GSM SMS Remote Control;
GSM Switch
GSM Gas Leak Controller alarm,S140;
4I/2O/USB Ports;
Remote control machines;
GSM SMS Remote Control;
GSM Alarm system;GSM Switch
The GSM SMS Controller Alarm is a very simple device which can be used for authorized door access, controlling gates, switching of remote equipments, car parking systems. Actually the GSM SMS Controller can be used in places which require turning ON/OFF your system, machines, equipments remotely with a SMS text from your mobile phone and protect your assets.
Moreover, the GSM SMS Controller-Alarm with 2 digital inputs, when any one of the inputs triggered, will start the siren or switch on the light automatically. in the meanwhile, the GSM SMS Controller will send SMS Alert the to owners immediately. This is very useful if you need protect your assets with low cost solution.
Mainly Features of the GSM SMS Controller-Alarm S140:
1 relay output (240VAC@3A) can be switched ON/OFF by sending a SMS text;
1 relay output (240VAC@3A) can be switch on 4minutes if any inputs triggered;
4 Alarm logic inputs, NC or NO and EOL is optional;
3 SMS Alert numbers and 5 auto-dial numbers can accept to the alarm message;
Two-way voice communication by external microphone and speaker;
Supports armed, disarmed, inquiry status, switch on or off relay output by SMS Commands;
Password protected, prevents unauthorized user;
Can be set up and programmed from PC Programmer by USB cable;
Time stamped alarm messages;
Backup rechargeable battery inside, can work for 24hours when power off;
Can be operated from anywhere, no distance limit;
Based on GSM Network, applied to many applications.
A Professional GSM Alarms,GSM Alarm system,GSM MMS Alarm,GSM House Alarm,GSM Control Alarm, GSM SMS Alarms,Fixed Celluar Terminal,Fixed Wireless Terminal OEM ODM Manufacturer in China.
API 5CT oil casing pipe
1. Our company has passed API certification and
2. Specialized petroleum casing pipe
3. Size: 4 1/2" -13 3/8
1. Our company is specialized in manufacturing API oil casing pipe. We have gained API 5CT and ISO9001:2000 quality certification to ensure the best quality of our products.
2. We specializing in producing petroleum casing pipe, our products are all eligible. Our oil tube has the good quality and good price. That is, you can trust us, and look forward to our first or the further cooperation.
3. The management and the employees of the company sincerely welcome domestic and foreign friends to the company for business inquiry and negotiation.
API 5CT Oil Casing Pipe
Outer Diameter
Wall Thickness
Grade
Thread
Length
in
mm
kg/m
lb/ft
4 1/2"
114.3
14.14-22.47
9.50-15.10
J55/N80/P110/K55
LTC/STC/BTC
R1/R2/R3
5"
127
17.11-35.86
11.50-24.10
J55/N80/P110/K55
LTC/STC/BTC
R1/R2/R3
5 1/2"
139.7
20.83-34.23
14.00-23.00
J55/N80/P110/K55
LTC/STC/BTC
R1/R2/R3
6 5/8"
168.28
29.76-35.72
20.00-24.00
J55/N80/P110/K55
LTC/STC/BTC
R1/R2/R3
7"
177.8
25.30-56.55
17.00-38.00
J55/N80/P110/K55
LTC/STC/BTC
R1/R2/R3
7 5/8"
193.68
35.72-63.69
24.00-42.80
J55/N80/P110/K55
LTC/STC/BTC
R1/R2/R3
8 5/8"
219.08
35.72-72.92
24.00-49.00
J55/N80/P110/K55
LTC/STC/BTC
R1/R2/R3
9 5/8"
244.48
48.07-86.91
32.30-58.40
J55/N80/P110/K55
LTC/STC/BTC
R1/R2/R3
10 3/4"
273.05
48.73-97.77
32.75-65.70
J55/N80/P110/K55
LTC/STC/BTC
R1/R2/R3
11 3/4"
298.45
62.50-89.29
42.00-60.00
J55/N80/P110/K55
LTC/STC/BTC
R1/R2/R3
13 3/8"
339.72
71.43-107.15
48.00-72.00
J55/N80/P110/K55
LTC/STC/BTC
R1/R2/R3
2. Specialized petroleum casing pipe
3. Size: 4 1/2" -13 3/8
1. Our company is specialized in manufacturing API oil casing pipe. We have gained API 5CT and ISO9001:2000 quality certification to ensure the best quality of our products.
2. We specializing in producing petroleum casing pipe, our products are all eligible. Our oil tube has the good quality and good price. That is, you can trust us, and look forward to our first or the further cooperation.
3. The management and the employees of the company sincerely welcome domestic and foreign friends to the company for business inquiry and negotiation.
API 5CT Oil Casing Pipe
Outer Diameter
Wall Thickness
Grade
Thread
Length
in
mm
kg/m
lb/ft
4 1/2"
114.3
14.14-22.47
9.50-15.10
J55/N80/P110/K55
LTC/STC/BTC
R1/R2/R3
5"
127
17.11-35.86
11.50-24.10
J55/N80/P110/K55
LTC/STC/BTC
R1/R2/R3
5 1/2"
139.7
20.83-34.23
14.00-23.00
J55/N80/P110/K55
LTC/STC/BTC
R1/R2/R3
6 5/8"
168.28
29.76-35.72
20.00-24.00
J55/N80/P110/K55
LTC/STC/BTC
R1/R2/R3
7"
177.8
25.30-56.55
17.00-38.00
J55/N80/P110/K55
LTC/STC/BTC
R1/R2/R3
7 5/8"
193.68
35.72-63.69
24.00-42.80
J55/N80/P110/K55
LTC/STC/BTC
R1/R2/R3
8 5/8"
219.08
35.72-72.92
24.00-49.00
J55/N80/P110/K55
LTC/STC/BTC
R1/R2/R3
9 5/8"
244.48
48.07-86.91
32.30-58.40
J55/N80/P110/K55
LTC/STC/BTC
R1/R2/R3
10 3/4"
273.05
48.73-97.77
32.75-65.70
J55/N80/P110/K55
LTC/STC/BTC
R1/R2/R3
11 3/4"
298.45
62.50-89.29
42.00-60.00
J55/N80/P110/K55
LTC/STC/BTC
R1/R2/R3
13 3/8"
339.72
71.43-107.15
48.00-72.00
J55/N80/P110/K55
LTC/STC/BTC
R1/R2/R3
Nitrogen Spherical Tanks
Customized model for Natural Gas Storage, for Pak industries keeping in consideration the current situation of Energy Shortage.
Specification
Wall thickness of Spherical shell plates
From 12mm to 62mm
Minimum Temperature
-50°C
Maximum single size
Width 3,650mm, length 12,580mm
Medium
Ethylene, Propylene, Oxygen, Nitrogen, Ammonia, Vinyl Chloride, natural gas, argon, Hydrogen, Liquefied Gas, LPG, LNG, Coal Gas, Water Gas, Compressed Air, Vacuum, Liquid Ammonia, Liquid Nitrogen, Refined Propylene, Butadiene, Isobutene, Propane, C3 Fraction, C4, C5, VCM, Clean Oil, Liquid Methyl Ether, Liquid Carbon Dioxide, Pulverized Coal, Light Hydrocarbon, methyl chloride, etc.
Cubage Dimension
From 50m³ to 10000m³
Note:
OEM service, provide all kinds of specifications and models of spherical tank according to customers requirements
Specification
Wall thickness of Spherical shell plates
From 12mm to 62mm
Minimum Temperature
-50°C
Maximum single size
Width 3,650mm, length 12,580mm
Medium
Ethylene, Propylene, Oxygen, Nitrogen, Ammonia, Vinyl Chloride, natural gas, argon, Hydrogen, Liquefied Gas, LPG, LNG, Coal Gas, Water Gas, Compressed Air, Vacuum, Liquid Ammonia, Liquid Nitrogen, Refined Propylene, Butadiene, Isobutene, Propane, C3 Fraction, C4, C5, VCM, Clean Oil, Liquid Methyl Ether, Liquid Carbon Dioxide, Pulverized Coal, Light Hydrocarbon, methyl chloride, etc.
Cubage Dimension
From 50m³ to 10000m³
Note:
OEM service, provide all kinds of specifications and models of spherical tank according to customers requirements
Subscribe to:
Posts (Atom)