XunDa PE Outer-layer Anticorrosion Tape

We offer these PE outer-layer anticorrosion tapes in different sizes as per demands of our customers at really affordable prices
Description
The Polyehtylene Anticorrosion Tape 200 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines. The outer-layer tape backing shall be compounded so that it will be resistance to outdoor weathering.

The
outer-layer tape
shall be applied after the inner-layer tape by hand or with a wrapping machine.
Structure
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Outer layer: Special blend of stabilized polyethylene
Features:
Excellent adhesion to inner-layer tape and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
Cold applied
Technical datas:

OUTER WRAP TAPE: XUNDA-T200 Series

Type
T 250
T 265
T 280
Total thickness
0.51 mm
0.65 mm
0.80 mm
Film
0.38 mm
0.51 mm
0.63 mm
Adhesive
0.13 mm
0.14 mm
0.17 mm
Elongation at Break
³ 400%
Tensile Strength
45.3 N/cm
50.8 N/cm
60.1 N/cm
Yield Strength
35.9 N/cm
43.4 N/cm
45.8 N/cm
Dielectric Breakdown
32.9 KV/mm
43.5 KV/mm
45.2 KV/mm
Cathodic Disbandment
0.24 in radius 6.4 mm
Volume Resistivity
2.5 x 10
12
ohm.m
Water Vapor Transmission Rate
£ 0.08 gm/M
2
/24h
Water Absorption Rate
< 0.07%
Recommended Application Temperature
-5
0
to +60
0
C
Color
White
Available Roll Size (width x length)
2" to 9" X 50 to 600 feet